Drilling and Production Regulation, B.C. Reg. 282/2010
Section 69
Water produced at oil wells
Cite as Drilling and Production Regulation, B.C. Reg. 282/2010, s. 69 · last amended April 1, 2025 · read from BC Laws on November 17, 2026
The text
(1) If the water production from a permit holder's oil well is 100 m3/1 000 m3 or more of the total liquid production and no test treater facilities are available, the permit holder must ensure that the water content of the oil is determined by
(a) continuous proportional sampling of the produced liquids and accurate analysis of the sample, or
(b) a product analyzer.
(2) If the water production from a permit holder's oil well is less than 100 m3/1 000 m3 of the total liquid production and no test treater facilities are available, the permit holder must ensure that the water content of the oil is determined by centrifuging 2 samples taken at reasonable intervals during each test and averaging the results or by methods described in subsection (1).
(3) If the total water production at a permit holder's oil well or battery exceeds 50 m3 per month and the water content exceeds 5 m3/1 000 m3 of the total liquid production, the permit holder must ensure that the water is separated from the oil and accurately gauged or metered at the well, the battery or a central treating facility.
(4) If the total water production from a permit holder's multi-well battery is less than 50 m3 per month, the permit holder must ensure that water production is determined by totalling the calculated water production for each well based on its individual test rate.
(5) If the total water production from a permit holder's oil well not grouped with others in a battery is less than 50 m3 per month, the permit holder must ensure that the water production is determined by centrifuging 3-spot or proportional samples taken at well spaced intervals during the month and averaging the results or by the method described in subsection (1).
(6) A permit holder must quantify sediment and water production in accordance with chapter 10.4, "Determination of Water and/or Sediment in Crude Oil by the Centrifuge Method", in the American Petroleum Institute's Manual of Petroleum Measurement Standards, as amended from time to time.
Read the Drilling and Production Regulation on BC Laws ↗
Made under Energy Resource Activities Act, SBC 2008, c. 36.