Drilling and Production Regulation, B.C. Reg. 282/2010

Section 49

Emergency shutdown devices

Cite as Drilling and Production Regulation, B.C. Reg. 282/2010, s. 49 · last amended April 1, 2025 · read from BC Laws on November 17, 2026

The text

(1) A permit holder must not bypass or disable safety equipment at a well that is producing, injecting or disposing of fluids, or at a facility, unless (a) the purpose of the bypass or disablement is to carry out maintenance or commissioning of the well or facility, (b) the well or facility is continuously monitored, (c) the permit holder has established and documented work procedures sufficient to ensure that the operation can be conducted safely, and (d) the operation is conducted in accordance with the procedures referred to in paragraph (c). (2) Subject to subsection (1), a permit holder must lock or car seal any valve or device that can bypass or disable safety equipment at a well that is producing, injecting or disposing of fluids, or at a facility.
Read the Drilling and Production Regulation on BC Laws ↗

Made under Energy Resource Activities Act, SBC 2008, c. 36.