Drilling and Production Regulation, B.C. Reg. 282/2010

Section 21.1

Induced seismicity

Cite as Drilling and Production Regulation, B.C. Reg. 282/2010, s. 21.1 · last amended April 1, 2025 · read from BC Laws on November 17, 2026

The text

(1) During fracturing, injection or disposal operations on a well, the well permit holder must immediately report to the regulator any seismic event within a 3 km radius of the drilling pad that is recorded by the well permit holder or reported to the well permit holder by any source available, if (a) the seismic event has a magnitude of 4.0 or greater, or (b) a ground motion is felt on the surface by any individual within the 3 km radius. (2) If a well is identified by the well permit holder or the regulator as being responsible for a seismic event that has a magnitude of 4.0 or greater, the well permit holder must suspend fracturing, injection and disposal operations on the well immediately. (3) Fracturing, injection and disposal operations suspended under subsection (2) may continue once the well permit holder has implemented operational changes satisfactory to the regulator to reduce or eliminate the initiation of additional induced seismic events.
Read the Drilling and Production Regulation on BC Laws ↗

Made under Energy Resource Activities Act, SBC 2008, c. 36.