Drilling and Production Regulation, B.C. Reg. 282/2010
Section 13
Personnel
Cite as Drilling and Production Regulation, B.C. Reg. 282/2010, s. 13 · last amended April 1, 2025 · read from BC Laws on November 17, 2026
The text
(1) A well permit holder must ensure that
(a) there is a sufficient number of trained and competent individuals carrying out well operations for those operations to be carried out safely and without causing pollution, and
(b) any operational procedure that is a hazard to safety or the environment is corrected and all affected persons are informed of the alteration.
(2) A driller of a well being drilled or tested during drilling operations, other than a well that is drilled to access usable groundwater, must
(a) be trained in blowout prevention,
(b) have a valid first line supervisor's blowout certificate or a valid second-line supervisor's well control certificate issued by an accepted safety training organization, and
(c) provide evidence of the driller's qualifications to an official on the official's request.
(3) A rig manager and the permit holder's representative at the well site where a well, other than a well that is used to access usable groundwater, is being drilled or tested during drilling operations must
(a) be trained in blowout prevention,
(b) have a valid second-line supervisor's certificate issued by an accepted safety training organization, and
(c) provide evidence of their qualifications to an official on the official's request.
(4) The following people must possess, during servicing operations on a well other than a well that is drilled to access usable groundwater, a valid well service blowout prevention certificate issued by an accepted safety training organization and provide evidence of their qualifications to an official on the official's request:
(a) the driller on tour;
(b) the rig manager;
(c) the well permit holder's representative.
Read the Drilling and Production Regulation on BC Laws ↗
Made under Energy Resource Activities Act, SBC 2008, c. 36.