Drilling and Production Regulation, B.C. Reg. 282/2010
Section 1
Definitions
Cite as Drilling and Production Regulation, B.C. Reg. 282/2010, s. 1 · last amended April 1, 2025 · read from BC Laws on November 17, 2026
The text
In this regulation:
“abandon”, in relation to a well, means permanently to plug the well in accordance with Part 5;
“accepted safety training organization” means either of the following:
(a) the non-profit organization of Canadian petroleum industry trade associations known as Energy Safety Canada that provides certification, training and health and safety services to the oil and gas industry;
(b) an organization equivalent to that referred to in paragraph (a) that provides certification, training and health and safety services to the oil and gas industry that are satisfactory to an official;
“Act” means the Energy Resource Activities Act;
“annual gas allowable” means, for any production period, the volume of natural gas determined by multiplying the daily gas allowable by either
(a) the number of days from November 1 to October 31 inclusive, or
(b) in the initial production year, the number of days from the date production began to October 31 inclusive;
“ASME” means the American Society of Mechanical Engineers;
“ASME Standard B31.3” means ASME Standard B31.3, Process Piping, as amended from time to time;
“barrier” means any fluid, plug or seal that prevents gas or oil or any other fluid from flowing unintentionally from a well or from a formation into another formation;
“battery” means a system or arrangement of tanks or other surface equipment receiving the effluents of one or more wells prior to delivery to market or other disposition, and may include equipment or devices for separating the effluents into petroleum, natural gas or water and for measurement;
“completed”, in relation to a well or zone, means a well or zone that is physically able to permit
(a) the production of fluids from the well or zone,
(b) the observation of the performance of a reservoir, or
(c) the injection or disposal of fluids into a zone;
“concurrent production” means the controlled, simultaneous production from a pool of petroleum and natural gas at a gas-oil ratio that exceeds the solution gas-oil ratio;
“core lab” means the facility for the storage and examination of well samples and cores;
“CSA” means the CSA Group;
“CSA Standard Z341” means CSA Standard Z341, Storage of hydrocarbons in underground formations, as amended from time to time;
“CSA Standard Z662” means CSA Standard Z662, Oil and gas pipeline systems, as amended from time to time;
“CSA Standard Z741” means CSA Standard Z741, Geological storage of carbon dioxide, as amended from time to time;
“daily gas allowable” or “DGA” means the volume of natural gas determined by multiplying the unadjusted daily gas allowable by any applicable adjustment factors in accordance with section 7 (7) or as otherwise specified in writing in a permit or a designation;
“daily oil allowable” or “DOA” means the volume of petroleum determined in accordance with section 54;
“daily production limit” means a volume equal to 125% of the daily oil allowable or daily gas allowable;
“deep groundwater” has the same meaning as in section 51 of the Water Sustainability Regulation;
“emergency planning zone” has the same meaning as in section 1 of the Emergency Management Regulation;
“facility permit” means a permit that includes permission to construct or operate a facility;
“facility permit holder” means a permit holder of a facility permit;
“flare stack” means a vertical pipe in which natural gas or gas derived from petroleum is combusted at the tip;
“flaring” means the disposal by combustion of natural gas or gas derived from petroleum;
“groundwater” has the same meaning as in the Water Sustainability Act;
“incinerator” means a device designed to dispose of natural gas or gas derived from petroleum by combusting the gas inside a chamber of the device;
“initial oil production” means the first production after the release of the drilling rig and after the recovery of a volume of petroleum equal to the volume of the completion petroleum;
“integrity management program”, in relation to a facility, means a documented program that specifies the practices used to ensure the safe, environmentally responsible and reliable operation of the facility;
“monthly oil allowable” means, for any month, the volume of petroleum determined by multiplying the daily oil allowable by the number of days in the month;
“natural boundary” has the same meaning as in section 1 of the Land Act;
“natural gas by-products” means natural gas liquids, sulphur and substances other than marketable natural gas that are recovered from raw natural gas by processing or normal 2-phase field separation;
“observation well” means a well or a portion of a well designated as an observation well under section 2 (7);
“overproduction of oil” means, at the end of the test period, the amount by which petroleum production during the test period exceeds the test period allowable, and on any succeeding day means the amount by which the actual production from the beginning of the production period exceeds the production target;
“producing well” means a completed well that has been placed on regular production;
“production period” means a period beginning on the day following the test period to the following October 31 and thereafter means a 12 month period ending on October 31 each year;
“production tank” means a tank used to receive and store produced or waste liquids at a facility, but does not include a tank used to receive and store liquids only during maintenance operations or process upsets;
“production target” means, at the end of any day, the sum of the daily oil allowables for each day from the beginning of the production period plus any underproduction or less any overproduction carried forward from the test period or a preceding production period;
“proration battery” means a battery that gathers from more than one well and where the petroleum volume, water volume and natural gas volume produced from the wells are measured at the battery outlet and are then allocated to each well based on test results;
“qualified professional”, in relation to a matter, means an individual who
(a) is registered with a regulatory body as defined in section 1 (1) [definitions and interpretation] of the Professional Governance Act, and
(b) through suitable education, experience, accreditation and knowledge, may reasonably be relied on to provide advice within the individual's area of expertise as it relates to the matter;
“safety equipment” means equipment that is required for the safe operation and shutdown of a producing well or facility;
“test period” means, commencing with the day of initial oil production, the lesser of either 90 producing days or the time required to produce the test period allowable;
“turnaround”, in relation to a facility, means a planned shutdown to allow for maintenance, cleaning, inspection, repairs or an overhaul;
“unadjusted daily gas allowable” or “UDGA” means the greater of
(a) 60 000 m3, and
(b) the volume of gas determined from reservoir parameters and approved by an official,
except in the case of concurrent producers, in which case paragraph (b) applies;
“unadjusted daily oil allowable” or “UDOA” means the volume of oil determined in accordance with section 54 (2);
“underproduction of oil” means, at the end of the test period, the amount by which petroleum production during the test period is less than the test period allowable and, at the end of any succeeding day, means the amount by which the actual production from the beginning of the production period is less than the production target;
“usable groundwater” means groundwater that is not deep groundwater;
“water body” means a natural water course or source of water supply, whether usually containing water or not, but does not include muskeg;
“water production” means the flowing of water from a water source well;
“water supply well” has the same meaning as in the Ground Water Protection Regulation, B.C. Reg. 299/2004;
“well control” means control of the movement of fluids into or from a well;
“well operation” means the operation of drilling, completing, recompleting, intervening, re-entering, carrying out a workover, suspending or abandoning a well;
“well permit” means a permit that includes permission to drill or operate a well;
“wellhead”
(a) includes the flow control valves and all equipment installed on a well above the uppermost portion of the surface casing, and
(b) does not include associated flow lines;
“workover” means
(a) any operation that changes the configuration or producing characteristics of a well or zone,
(b) the installation or removal of equipment from a wellbore, and
(c) stimulation operations.
(d) Repealed. [B.C. Reg. 146/2017, App. 1, s. 1 (b).]
Read the Drilling and Production Regulation on BC Laws ↗
Made under Energy Resource Activities Act, SBC 2008, c. 36.