Hydrogen Facility Regulation, B.C. Reg. 27/2025
Section 3
Adopted codes and standards
Cite as Hydrogen Facility Regulation, B.C. Reg. 27/2025, s. 3 · last amended March 10, 2026 · read from BC Laws on November 17, 2026
The text
(1) In this section:
“API” means the American Petroleum Institute;
“CSA” means the CSA Group;
“NFPA” means the National Fire Protection Association.
(2) Subject to this section, the following codes and standards, as amended from time to time, are adopted for the purposes of this regulation:
(a) API Standard 570, Piping Inspection Code: In-service Inspection, Rating, Repair, and Alteration of Piping Systems;
(b) CSA Standard Z767, Process safety management;
(c) CAN/BNQ 1784-000, Canadian Hydrogen Installation Code, published by the Bureau de normalisation du Québec;
(d) NFPA 2, Hydrogen Technologies Code.
(3) The standard referred to in subsection (2) (b) is adopted only in relation to a Class 2 hydrogen facility.
(4) A hydrogen facility permit holder must design, construct and operate the hydrogen facility that is the subject of the permit in compliance with the code referred to in subsection (2) (c) or the code referred to in subsection (2) (d).
Read the Hydrogen Facility Regulation on BC Laws ↗
Made under Energy Resource Activities Act, SBC 2008, c. 36.