Fort St. John Pilot Project Regulation, B.C. Reg. 278/2001

Section 95

Minimum widths of riparian reserve zones and riparian management zones for lakes

Cite as Fort St. John Pilot Project Regulation, B.C. Reg. 278/2001, s. 95 · last amended April 1, 2024 · read from BC Laws on November 17, 2026

The text

(1) A lake of a riparian class of L1 has a riparian reserve zone width of 10 m, unless otherwise specified by the district manager. (2) A lake of a riparian class of L3 has a riparian reserve zone of 0 m and a riparian management zone width of 30 m. (3) Despite subsections (1) and (2), a lake greater than 1 000 ha has no riparian reserve zone. (4) Despite subsections (1) and (2), for any lake or portion of a lake, the district manager, with the agreement of a designated environmental official, may vary the widths referred to in those subsections. (5) Despite subsection (3), for a lake referred to in that subsection or a portion of that lake, the district manager, with the agreement of a designated environmental official, may (a) require a riparian reserve zone, and (b) specify the width of that zone. (6) The riparian reserve zone extends the widths specified in subsection (1), (2), (4) or (5) from the edge of (a) the natural boundary of the lake, or (b) the wetland that is contiguous to the lake if the wetland is up to 5 ha in size. (7) The riparian management zone extends from (a) the outer edge of the riparian reserve zone, or (b) if there is no riparian reserve zone, the edge of the wetland.
Read the Fort St. John Pilot Project Regulation on BC Laws ↗

Made under Forest and Range Practices Act, SBC 2002, c. 69.