Fort St. John Pilot Project Regulation, B.C. Reg. 278/2001

Section 93

Minimum widths of riparian reserve zones and riparian management zones for wetlands

Cite as Fort St. John Pilot Project Regulation, B.C. Reg. 278/2001, s. 93 · last amended April 1, 2024 · read from BC Laws on November 17, 2026

The text

(1) For each riparian class referred to in section 92, the minimum reserve zone and riparian management zone width is the following: Riparian Class Riparian Reserve Zone (m) Riparian Management Zone (m) Riparian Management Area (m) W1 10 40 50 W3 0 30 30 W5 10 40 50 (2) Despite subsection (1), upland terrain in a wetland larger than 1 000 ha has no riparian reserve zone or riparian management zone. (3) Despite subsection (1), for any wetland or portion of a wetland, the district manager, with the agreement of a designated environmental official, may vary the widths referred to in that subsection. (4) Despite subsection (2), for a wetland referred to in that subsection or a portion of that wetland, the district manager, with the agreement of a designated environmental official, may (a) require a riparian reserve zone or a riparian management zone, and (b) specify the widths of those zones. (5) The riparian reserve zone extends the widths specified in subsection (1), (3) or (4) from the edge of the wetland. (6) The riparian management zone extends the widths specified in subsection (1), (3) or (4) from (a) the outer edge of the riparian reserve zone, or (b) if there is no riparian reserve zone, the edge of the wetland.
Read the Fort St. John Pilot Project Regulation on BC Laws ↗

Made under Forest and Range Practices Act, SBC 2002, c. 69.