Motor Vehicle Act Regulations, B.C. Reg. 26/58
Schedule 1
Schedule
Cite as Motor Vehicle Act Regulations, B.C. Reg. 26/58, Schedule 1 · last amended October 19, 2027 · read from BC Laws on November 17, 2026
The text
Schedule
Table 1 — Standards for Approval of a Motor Vehicle Headlamp
and Other Illuminating Lamps Aiming Requirements
[en. B.C. Reg. 476/98, s. 2.]
Visual aim based in millimetres at 7.62 metres Headlamps Beams to be Used When Aimed or Inspected Area of High Intensity Zone to be Aimed or Inspected Lateral Aim Lateral Inspection Tolerance Vertical Aim Vertical Inspection Tolerance 146 mm Type 1 sealed beam Upper Centre At V 150 mm left to
150 mm right of V 13 mm up from H 125 mm up to
100 mm down
from H 146 mm and 178 mm Type 2 sealed beam Lower Left Edge
Top Edge 25 mm right of V 100 mm left to
150 mm right of V 60 mm up from H 175 mm up to
50 mm down from H 178 mm sealed beam not marked Type 2 Upper Centre At V 150 mm left to
150 mm right of V 13 mm up from H 125 mm up to
100 mm down
from H European headlamps marked "E" and beam lamps marked "R" or "HR" Upper Centre At V 125 mm left to
125 mm right of V At H At H to 115 mm below Low beam lamps marked "C" or "HC" Lower Junction of horizontal and sloped cut off
Top edge of horizontal cut off At V 125 mm left to
125 mm right of V
100 mm below H 75 mm below to
190 mm below H Dual beam lamps marked "CR" or
"HCR" Lower and Upper Top edge of horizontal cut off
Centre At V 125 mm left to
125 mm right of V 100 mm below H 75 mm below to
190 mm below H Fog lamps symmetrical Centre
Top edge At V 150 mm left to
150 mm right of V 100 mm below H At H or below Fog lamps asymmetrical Left edge
Top edge 25 mm right of V 100 mm left to
100 mm right of V 60 mm above V 175 mm above to
50 mm below H Auxiliary passing lamp Left edge
Top edge 25 mm right of V 100 mm left to
100 mm right of V 60 mm above H 175 mm below to
50 mm below H Auxiliary driving lamp Centre At V 150 mm left to
150 mm
right of V 13 mm up from H 125 mm up to
100 mm
down from H Motor vehicle minimum beam candela: Upper beam, 10 000; lower beam, 7 000.
Motorcycle minimum beam candela: Upper beam, 5 000; lower beam, 3 500.
This standard is based on S.A.E. standard—Lighting Inspection Code and recommended headlamp tolerances for E.C.E. lamps
supplied by the Road and Motor Vehicles Safety Section, Transport Canada.
Abbreviations: V=vertical centreline straight ahead of lamp centre. H=horizontal centreline at level of lamp centre.
Read the Motor Vehicle Act Regulations on BC Laws ↗
Made under Motor Vehicle Act, RSBC 1996, c. 318.