Motor Vehicle Act Regulations, B.C. Reg. 26/58

Section 7.163

Chains on light commercial motor vehicles

Cite as Motor Vehicle Act Regulations, B.C. Reg. 26/58, s. 7.163 · last amended October 19, 2027 · read from BC Laws on November 17, 2026

The text

(1) In this section: “minister” means the minister referred to in section 208 (2) of the Act; “sign requiring the use of chains” means a sign, placed by the minister under section 208 of the Act, that prohibits a vehicle from being driven or operated on a highway unless the vehicle is equipped with chains. (2) This section applies to the following types of commercial motor vehicles: (a) a commercial motor vehicle that has a licensed gross vehicle weight less than 11 794 kg; (b) a bus; (c) a 4-wheel drive vehicle. (3) Subject to subsection (4), if the minister places a sign requiring the use of chains, a person who drives or operates a motor vehicle referred to in subsection (2) may comply with the sign by equipping the motor vehicle with a traction device, in accordance with subsection (6), instead of chains. (4) Subsection (3) does not apply if the minister specifies otherwise in a public notice or sign placed under section 208 of the Act. (5) A motor vehicle referred to in subsection (2) is equipped with chains for the purposes of section 208 of the Act only if the following requirements are met: (a) the chains are one of the following types: (i) steel chains; (ii) cable chains; (iii) automatic chains having cross members that extend across at least 85 percent of the width of the vehicle; (b) the chains are used on the motor vehicle in the manner intended by the manufacturer of the chains; (c) if the chains are steel chains, (i) no strand of steel links is broken, and (ii) the steel chains are fastened on at least one tire on each side of one drive axle; (d) if the chains are cable chains, (i) no strand of steel cable is broken, and (ii) the cable chains are fastened on at least the outside tire of each side of one drive axle; (e) if the chains are automatic chains, the automatic chains are (i) deployed on at least one tire on each side of one drive axle, and (ii) not deployed on a tire on an axle that is not a drive axle. (6) A motor vehicle referred to in subsection (2) is equipped with a traction device for the purposes of section 208 of the Act only if the following requirements are met: (a) the traction device is one of the following types: (i) a textile tire cover; (ii) a wheel sander; (b) the traction device is used on the motor vehicle in the manner intended by the manufacturer of the traction device; (c) the traction device is used on one tire on each side of one drive axle.
Read the Motor Vehicle Act Regulations on BC Laws ↗

Made under Motor Vehicle Act, RSBC 1996, c. 318.