Code of Practice for Industrial Non-Hazardous Waste Landfills Incidental to the Wood Processing Industry, B.C. Reg. 263/2010
Section 20
Operational plan
Cite as Code of Practice for Industrial Non-Hazardous Waste Landfills Incidental to the Wood Processing Industry, B.C. Reg. 263/2010, s. 20 · last amended February 18, 2022 · read from BC Laws on November 17, 2026
The text
(1) A large landfill facility must be operated in accordance with the operational plan for the landfill facility.
(2) An operational plan must be prepared by a qualified professional and must include a description of the procedures for
(a) covering waste with inert cover material,
(b) monitoring groundwater,
(c) monitoring and managing surface water,
(d) monitoring and managing leachate,
(e) controlling dust, litter and disease vectors at the large landfill facility,
(f) controlling access to the large landfill by wildlife,
(g) accepting and diverting waste,
(h) responding to emergencies,
(i) monitoring and managing landfill gas, including by means of intercepting, venting, recovering or flaring,
(j) detecting and preventing the discharge of hazardous waste and other prohibited wastes, and
(k) doing anything else the qualified professional who prepares the plan considers necessary to meet the requirements of this code.
(3) The procedures for monitoring groundwater under subsection (2) (b) must
(a) provide for
(i) an assessment of the risk to groundwater quality from the large landfill facility,
(ii) the detection of changes in groundwater quality caused by the large landfill facility, and
(iii) sampling to measure seasonal variability,
(b) specify the number and location of monitoring locations for the monitoring network necessary to monitor groundwater quality, based on
(i) the volume and characteristics of the waste to be discharged to the large landfill,
(ii) the location and capacity of the large landfill,
(iii) the use of groundwater that can reasonably be expected to be made,
(iv) the hydrogeology of the area where the large landfill is located, and
(v) the direction, the horizontal and vertical gradient and the velocity of the groundwater flow, and
(c) based on the substances that are identified in the waste characterization report in accordance with section 5 (3) (e), specify the water quality parameters to be measured and the sampling frequency.
(4) The procedures for monitoring and managing surface water under subsection (2) (c) must
(a) provide for
(i) an assessment of the risk to surface water quality from the large landfill facility, and
(ii) the detection of changes in surface water quality caused by the large landfill facility,
(b) specify the number and location of monitoring locations for the monitoring network necessary to monitor surface water quality, based on
(i) the volume and characteristics of the waste to be discharged to the large landfill,
(ii) the type of surface water in the vicinity of the large landfill,
(iii) the location and capacity of the large landfill, and
(iv) adjacent land uses and surface water receptors, and
(c) be based on the substances that are identified in the waste characterization report in accordance with section 5 (3) (e) and specify the water quality parameters to be measured and the sampling frequency.
(5) In developing procedures for monitoring groundwater and surface water, if the large landfill is located on land above an aquifer, a qualified professional must consider aquifer classification as set out in an aquifer classification system approved by a director.
(6) A director may require the operator of a large landfill facility to undertake monitoring that is specified by the director and is additional to the monitoring required under the operational plan for that facility.
Read the Code of Practice for Industrial Non-Hazardous Waste Landfills Incidental to the Wood Processing Industry on BC Laws ↗
Made under Environmental Management Act, SBC 2003, c. 53.