Code of Practice for Industrial Non-Hazardous Waste Landfills Incidental to the Wood Processing Industry, B.C. Reg. 263/2010

Section 1

Definitions and interpretation

Cite as Code of Practice for Industrial Non-Hazardous Waste Landfills Incidental to the Wood Processing Industry, B.C. Reg. 263/2010, s. 1 · last amended February 18, 2022 · read from BC Laws on November 17, 2026

The text

In this code: “200 year floodplain” means land where the chance of a flood occurring in any given year is at least one in 200; “Act” means the Environmental Management Act; “aquifer” has the same meaning as in the Water Sustainability Act; “background concentration” means the concentration of a substance in an environmental medium in a geographic area, but does not include any contribution from local human-made point sources; “cell” means a compartment within a landfill; “conceptual closure plan” means a plan that meets the requirements of section 3 (2); “design plan” means a plan that meets the requirements of section 19 (2); “disease vector” means a carrier organism that is capable of transmitting a pathogen from one facility, waste source, product or organism to another facility, waste source, product or organism; “dredgings” means (a) wood residue, and (b) sand, gravel and rock, gathered by dredging in water below the high water mark; “electronic waste” means any waste from electronic products that are no longer in use, including television sets, computers, computer monitors and cell phones; “final closure plan” means a plan that meets the requirements of section 15 (2), (4) and (5); “final closure report” means a report referred to in section 16; “generic numerical water standard” has the same meaning as in the Contaminated Sites Regulation, B.C. Reg. 375/96; “groundwater” has the same meaning as in the Water Sustainability Act; “hazardous waste” has the same meaning as in the Hazardous Waste Regulation, B.C. Reg. 63/88; “inert cover material” means (a) soil, gravel or rock, or (b) any material that (i) if discharged to a landfill, cannot reasonably be expected to undergo a physical, chemical or biological change that will result in an adverse effect on the environment or human health, and (ii) is approved by a director for discharge to a landfill; “inert waste” means any of the following materials that have been used by a wood processing industry: (a) cured concrete that has been used for structural or construction purposes and that consists of a mixture of Portland cement, sand and gravel with or without embedded wood or steel reinforcements; (b) asphaltic material, except asphaltic roofing material and road grindings, that has been used for structural or construction purposes and that consists of a mixture of petroleum asphalt, sand and gravel; (c) brick and masonry that have been used for structural or construction purposes; (d) ceramic material that has been produced from fired clay or porcelain; (e) glass, except glass derived from electronic waste; (f) stainless steel and aluminum; (g) any other material that (i) if discharged to a landfill, cannot reasonably be expected to undergo a physical, chemical or biological change resulting in an adverse effect on the environment or human health, and (ii) is approved by a director for discharge to a landfill; “landfill” means the part of a landfill facility where solid waste referred to in section 8 is discharged; “landfill facility” means a facility described in section 2; “large landfill facility” means a landfill facility (a) the total capacity or designed total capacity of which is more than 5 000 cubic metres of waste, or (b) at which more than 500 cubic metres of solid waste is discharged per year or is specified in registration information provided under section 3 (1) (c); “local government” means (a) the council of a municipality, and (b) the board of a regional district; “natural control landfill” means a landfill that relies on climatic and geologic conditions to renovate leachate in the subsurface; “office or shop refuse” means waste originating from the office or shop of a wood processing industry, but does not include any of the following: (a) liquid waste; (b) putrescible waste; (c) electronic waste; (d) a product regulated under the Recycling Regulation, B.C. Reg. 449/2004; (e) hazardous waste; “operational plan” means a plan that meets the requirements of section 20; “qualified professional”, in relation to a duty or function under this code, means an individual who (a) is registered in British Columbia with a professional organization, is acting under that organization's code of ethics and is subject to disciplinary action by that organization, and (b) through suitable education, experience, accreditation and knowledge, may reasonably be relied on to provide advice within the individual's area of expertise, which area of expertise is applicable to the duty or function; “slope failure” means a measurable downward or outward movement of soil, rocks, snow, ice, mud or debris caused by gravity acting on an unstable slope; “surface water” means a natural watercourse, whether usually containing water or not, and includes (a) a lake, river, creek, spring, ravine, stream, swamp, gulch and brook, and (b) marine water; “unauthorized fire” means a fire or burning that is not authorized by or under an enactment; “waste characterization report” means a report that meets the requirements of section 5 (3); “Waste Discharge Regulation” means the Waste Discharge Regulation, B.C. Reg. 320/2004; “wood processing industry” means (a) a wood processing industry-primary, and (b) a wood processing industry-secondary, as defined in Schedule 2 to the Waste Discharge Regulation; “wood waste” means wood residue, other than dredgings, that (a) originates from a wood processing industry, and (b) has not been treated with glue, paint or preservative, and includes bark, branches, broken logs, hog fuel, mill ends, wood chips, shavings and saw dust.
Read the Code of Practice for Industrial Non-Hazardous Waste Landfills Incidental to the Wood Processing Industry on BC Laws ↗

Made under Environmental Management Act, SBC 2003, c. 53.