Minister's Skilled Trades BC Regulation, B.C. Reg. 256/2022

Schedule 1

Schedule

Cite as Minister's Skilled Trades BC Regulation, B.C. Reg. 256/2022, Schedule 1 · last amended July 6, 2026 · read from BC Laws on November 17, 2026

The text

Schedule [am. B.C. Regs. 141/2025; 111/2026, ss. 2 and 3.] Scope of Work 1 In this Schedule, "general trade activities", as applicable to a skilled trade certification trade and the specified relevant equipment, item, appliance or system, means the following tasks, activities or functions: (a) planning; (b) designing; (c) commissioning; (d) inspecting; (e) verifying; (f) testing; (g) adjusting; (h) troubleshooting; (i) maintaining; (j) servicing; (k) repairing; (l) altering; (m) decommissioning. 2 (1) The applicable scope of work set out in this Schedule applies in respect of each of the following skilled trade certification trades, effective December 1, 2023: (a) construction electrician; (b) industrial electrician; (c) powerline technician; (d) sheet metal worker; (e) gasfitter — Class A; (f) gasfitter — Class B; (g) steamfitter/pipefitter; (h) refrigeration and air conditioning mechanic. (2) The applicable scope of work set out in this Schedule applies in respect of each of the following skilled trades certification trades, effective July 5, 2027: (a) tower crane operator; (b) mobile crane operator. 3 (1) In this section, "electrical system" means a type of residential, commercial, institutional, industrial, transportation, marine or entertainment electrical system. (2) The prescribed scope of work for a construction electrician consists of the following: (a) general trade activities in respect of electrical systems; (b) installing and operating electrical systems. 4 The prescribed scope of work for an industrial electrician consists of the following: (a) general trade activities, other than decommissioning, in respect of industrial electrical equipment and associated electrical and electronic controls; (b) installing and operating industrial electrical equipment and associated electrical and electronic controls. 5 (1) In this section, "associated equipment" means insulators, conductors, lightning arrestors, switches, metering systems, transformers and lighting infrastructure. (2) The prescribed scope of work for a powerline technician consists of (a) general trade activities, other than decommissioning, in respect of powerlines, cables and associated equipment that are overhead, underground or underwater; (b) installing and operating powerlines, cables and associated equipment that are overhead, underground or underwater. 6 (1) In this section: “integral equipment” means components that are integral to the functioning of a blowpipe, air pollution, heating, ventilating or air-conditioning system, which only a sheet metal worker can fabricate or install and which are essential for the system to operate; “sheet metal items” means ducting, spouting, fittings, cabinets, copings, flashings, supporting devices, wall systems, building envelope and other custom fabricated objects, constructed from sheet metal. (2) Subject to subsection (3), the prescribed scope of work for a sheet metal worker consists of the following: (a) general trade activities in respect of (i) sheet metal items and installing sheet metal items other than cabinets, and (ii) integral equipment; (b) laying out, fabricating, assembling, connecting, installing and welding sheet metal items and installing sheet metal items other than cabinets; (c) fabricating, assembling, connecting, installing and welding integral equipment. (3) The scope of work prescribed in subsection (2) of this section does not apply to a person carrying out the tasks, activities or functions described in that scope of work, if carried out for the following: (a) installation of and work on gutters, fascia or metal studs; (b) installation of and work on siding, roofing or appliance air supply, breeching or venting systems; (c) work performed by mass production; (d) an artistic purpose. 7 (1) In this section: "equipment" includes boilers, burners, makeup air units, furnaces, process burners and other gas-fired equipment; "fuel" means a liquid or gas fuel or a fuel oil; "gas", in respect of fuel, has the same meaning as in section 2 of the Gas Safety Regulation. (2) The prescribed scope of work for a gasfitter — Class A consists of the following: (a) general trade activities in respect of gas lines, appliances, equipment and accessories of any Btuh (British Thermal Units per hour) or wattage; (b) assembling, connecting and installing gas lines, appliances, equipment and accessories of any Btuh (British Thermal Units per hour) or wattage; (c) installing wiring to connect components to an electrical power supply and calibrating related controls, including gas utilities. 8 (1) In this section, "equipment", "fuel" and "gas" have the same meaning as in section 7 (1) of this Schedule. (2) The prescribed scope of work for a gas fitter — Class B consists of the following: (a) general trade activities, other than designing, in respect of gas lines, appliances, equipment and accessories that do not exceed 400 000 Btuh (British Thermal Units per hour) or 120 kW (kilowatts); (b) assembling, connecting and installing gas lines, appliances, equipment and accessories that do not exceed 400 000 Btuh (British Thermal Units per hour) or 120 kW (kilowatts); (c) installing wiring to connect components to an electrical power supply and calibrating related controls, including gas utilities. 9 The prescribed scope of work for a steamfitter/pipefitter consists of the following: (a) general trade activities in respect of equipment and piping systems that carry water, steam, fluids, gases, chemicals or fuel for heating, cooling, lubricating and process piping systems; (b) laying out, assembling, fabricating, connecting and installing equipment and piping systems that carry water, steam, fluids, gases, chemicals or fuel for heating, cooling, lubricating or process piping systems. 10 (0.1) In this section, “private dwelling” means (a) a structure that is occupied as a private residence, or (b) if only part of a structure is occupied as a private residence, that part of the structure. (1) Subject to subsection (2), the prescribed scope of work for a refrigeration and air conditioning mechanic consists of the following: (a) general trade activities in respect of ventilation, air conditioning and refrigeration units and systems; (b) connecting to air delivery systems for refrigeration or air conditioning units; (c) installing ventilation, air conditioning and refrigeration units and systems; (d) installing hydronic and secondary refrigerant systems and associated controls. (2) The scope of work prescribed in subsection (1) of this section does not apply to a person carrying out the tasks, activities or functions described in that scope of work, if carried out for the following: (a) work on refrigerated appliances manufactured primarily for residential use; (b) work on reefer units and other refrigerated shipping containers, or the manufacture of those types of units and containers; (c) installation of and work on residential humidifying and air exchange systems; (d) installation of and work on heat pumps that (i) serve a private dwelling, and (ii) have a prime mover rating of less than 5 kW. 11 (1) In this section: “luffing boom” means a boom that is raised and lowered about a pivot point to change the load radius; “tower crane” means a tower crane that (a) uses a horizontal, articulated or luffing boom to lift, position and place loads, and (b) is one of the following: (i) a tower crane erected on site from component parts; (ii) a self-erecting tower crane with a lift capacity of more than 10 t. (2) The prescribed scope of work for a tower crane operator consists of the following: (a) operating a tower crane to lift, position and place loads; (b) performing pre-operational equipment checks and limit tests in respect of a tower crane. 12 (1) In this section, “mobile crane” means a crane that (a) is friction-driven or hydraulic-driven, (b) uses a lattice boom or hydraulic boom to lift, position and place loads, (c) has a lift capacity of more than 80 t, and (d) is mounted on a self-propelled crawler or wheel-mounted mobile base. (2) The prescribed scope of work for a mobile crane operator consists of the following: (a) operating a mobile crane to lift, position and place loads; (b) performing pre-operational equipment checks in respect of a mobile crane; (c) stabilizing a mobile crane prior to lifting a load.
Read the Minister's Skilled Trades BC Regulation on BC Laws ↗

Made under Skilled Trades BC Act, SBC 2022, c. 4.