Oil and Gas Waste Regulation, B.C. Reg. 254/2005

Section 1

Definitions

Cite as Oil and Gas Waste Regulation, B.C. Reg. 254/2005, s. 1 · last amended July 8, 2024 · read from BC Laws on November 17, 2026

The text

In this regulation: “accepted by the director” means accepted in writing, authorized in writing or specified in writing by a director; “acid gas” means a mixture of gases, composed primarily of hydrogen sulphide and carbon dioxide, which is removed from natural gas; “Act” means the Environmental Management Act; “battery” means a facility at which the liquids obtained from one or more wells are stored before those liquids are processed for market or delivered to market or are otherwise disposed of, and may include equipment or other devices for separating the liquids into oil, natural gas and water; “compressor” means a device used to maintain or increase the pressure of the natural gas in a pipeline; “dehydrator” means a device designed and used to remove water from natural gas; “drilling rig” means a device used to drill or service wells; “drilling rig site” means the land on which a drilling rig operates or has operated and includes remote drilling waste sumps and other facilities associated with the drilling rigs; “driver” means a gas turbine or internal combustion engine used to power a compressor, electricity generator or oil pump; “electricity generator” means a device that converts mechanical power from a driver into electricity; “equipment” means an air compressor, air conditioner, analyzer, compressor, dehydrator, drilling rig, driver, electricity generator, fan, flare stack, incinerator, laboratory, line heater, meter, oil pump, pig, pig receiver, pipeline, portable pump, tank, treater, utility heater, well equipment or well head separator used for the production, processing or transportation of oil or natural gas; “facility” means one or more of the following situated at a single location and used for the production, processing or transportation of oil or natural gas: (a) a compressor; (b) a drilling rig site; (c) an oil pump; (d) a processing plant; (e) a collection of one or more pieces of equipment; (f) a battery; “flare pit” means an earthen containment area in which waste gases and liquids are combusted; “flare stack” means a pipe in which waste gases are combusted at the tip and “flaring” has the corresponding meaning; “high sulphur gas” means natural gas that contains more than 1% by volume hydrogen sulphide; “hydrostatic pipeline testing” means the practice of filling a pipeline with water, or a mixture of water and either ethylene glycol or methanol, for the purpose of testing the structural integrity of the pipeline under pressure; “incinerator” means a device designed to combust vapours containing hydrocarbons, or compounds containing sulphur, where the combustion occurs in a chamber inside the device; “line heater” means a device that is used primarily to heat natural gas or oil flowing in a pipeline; “low sulphur gas” means natural gas that contains not more than 1% by volume hydrogen sulphide; “natural gas” has the same meaning as in the Petroleum and Natural Gas Act; “NOx” means oxides of nitrogen expressed as nitrogen dioxide equivalent; “objectionable odour” means a substance that is introduced into the air and that causes or is capable of causing material physical discomfort to a person; “oil” means petroleum as that term is defined in the Petroleum and Natural Gas Act; “oil pump” means a device that increases the pressure of flowing oil, but does not include oil pumps located in an oil refinery or used to pump refined oil products; “operator” means, in relation to a facility or piece of equipment, a person who, under a permit issued under section 25 of the Energy Resource Activities Act, is permitted to carry out an oil and gas or storage activity, as defined in that Act, that is or that involves the operation of the facility or piece of equipment; “ozone depleting substance” has the same meaning as in the Ozone Depleting Substances and other Halocarbons Regulation; “pig” means a plug-like device that passes through a pipeline for the purpose of cleaning or inspecting the pipeline; “pig receiver” means a device, attached to a pipeline, that is used to remove a pig from a pipeline; “pig sender” means a device, attached to a pipeline, that is used to insert a pig into a pipeline; “pipeline” means a pipeline used to convey oil or natural gas; “processing plant” means a facility that extracts hydrogen sulphide, carbon dioxide, helium, ethane or natural gas liquids from natural gas; “produced water” means water or brine that is brought to the surface with the natural gas or oil from a well but excludes workover or completion liquids; “production liquid” means any liquid produced from a well, including oil, water, and workover or completion liquids; “sweet natural gas” means natural gas that contains less than 230 milligrams of total sulphur per cubic metre of natural gas; “tank” means a container used to store oil, natural gas, produced water, or other fluids associated with drilling and production of oil or natural gas, including containers mounted on vehicles; “total sulphur” means the total mass of sulphur contained in natural gas, including elemental sulphur and all sulphur in compounds, expressed as elemental sulphur; “treater” means a thermal device specifically designed and used for separating natural gas and water from crude oil; “well” has the same meaning as in the Petroleum and Natural Gas Act; “well completion or workover” means activities where fluids or solids are injected into a well for the purpose of maintaining or increasing the flow of oil or gas from the well, and the fluids or solids may subsequently be recovered; “well completion or workover solids” means recovered solids from a well completion or workover; “well equipment” means valves, flare stacks, pumps, meters or other associated devices located immediately adjacent to the well bore; “well head separator” means a device designed and used for separating gases and liquids produced from a well without the use of heat; “well testing” means combusting natural gas produced from a well for the purpose of determining production and reserve characteristics of the well, or the oil or gas reservoir into which the well is drilled.
Read the Oil and Gas Waste Regulation on BC Laws ↗

Made under Environmental Management Act, SBC 2003, c. 53.