Timber Marking and Transportation Regulation, B.C. Reg. 253/97

Section 9

Marine log brand requirements

Cite as Timber Marking and Transportation Regulation, B.C. Reg. 253/97, s. 9 · last amended April 1, 2024 · read from BC Laws on November 17, 2026

The text

(1) For the purpose of section 89 of the Act, if timber is marked with a marine log brand, the correct marine log brand must be applied using a hammer indentation on one log end of each piece of timber in rafts or bundles or on a barge. (2) Despite subsection (1), if timber described in that subsection is being transported in bundles, either in rafts on the water or on a barge from which the logs will be dumped into the water, (a) the correct marine log brand may be applied using a hammer indentation, or (b) a bundle tag showing the correct marine log brand may be attached to at least 4 log ends at the front and at least 4 log ends at the back of each bundle.
Read the Timber Marking and Transportation Regulation on BC Laws ↗

Made under Forest Act, RSBC 1996, c. 157.