Timber Marking and Transportation Regulation, B.C. Reg. 253/97
Section 7.1
Scaled timber brand requirements — water transportation
Cite as Timber Marking and Transportation Regulation, B.C. Reg. 253/97, s. 7.1 · last amended April 1, 2024 · read from BC Laws on November 17, 2026
The text
(1) For the purpose of section 86 of the Act, before a person transports scaled timber in rafts on the water, or as loose logs on a barge from which the logs will be dumped into the water, the correct scaled timber brand must be legibly and conspicuously applied on one log end of each piece of timber using a hammer indentation.
(2) For the purpose of section 86 of the Act, before a person transports scaled timber in bundles, either in rafts on the water or on a barge from which the bundles will be dumped into the water, a bundle tag must be attached, showing the correct scaled timber brand, to at least 4 log ends at the front and at least 4 log ends at the back of each bundle.
(3) For the purpose of section 86 of the Act, before a person transports scaled timber by barge, truck or rail car on a barge or ferry, or in bundles on a barge from which the timber will not be dumped into the water, the correct scaled timber brand must be legibly and conspicuously applied to each load or bundle using a hammer indentation on at least 2 log ends at the front and at least 2 log ends at the back.
Read the Timber Marking and Transportation Regulation on BC Laws ↗
Made under Forest Act, RSBC 1996, c. 157.