Timber Marking and Transportation Regulation, B.C. Reg. 253/97

Section 5

Timber marking requirements — water transportation

Cite as Timber Marking and Transportation Regulation, B.C. Reg. 253/97, s. 5 · last amended April 1, 2024 · read from BC Laws on November 17, 2026

The text

(1) For the purpose of section 84 of the Act, before a person transports unscaled timber in rafts on the water, or as loose logs on a barge from which the logs will be dumped into the water, the correct timber mark must be legibly and conspicuously applied on one log end of each piece of timber using a hammer indentation. (2) For the purpose of section 84 of the Act, before a person transports unscaled timber in bundles, either in rafts on the water or on a barge from which the bundles will be dumped into the water, (a) the correct timber mark must be legibly and conspicuously applied to at least 2 log ends at the front and at least 2 log ends at the back of the load of timber using a hammer indentation, and (b) the correct bundle tag must be attached to at least 2 log ends at the front and at least 2 log ends at the back of each bundle. (3) If the minister considers it necessary or desirable to minimize the risk of timber loss, the minister may impose additional timber mark requirements to those specified in subsection (2). (4) A person transporting timber under subsection (2) must comply with any conditions imposed under subsection (3) with respect to that timber. (5) For the purpose of section 84 of the Act, before a person transports unscaled timber by barge, truck or rail car on a barge or ferry, or in bundles on a barge from which the timber will not be dumped into the water, the correct timber mark must be legibly and conspicuously applied to each load or bundle using a hammer indentation on at least 2 log ends at the front and at least 2 log ends at the back.
Read the Timber Marking and Transportation Regulation on BC Laws ↗

Made under Forest Act, RSBC 1996, c. 157.