Greenhouse Gas Emission Reporting Regulation, B.C. Reg. 249/2015
Section 41.95
Compliance units
Cite as Greenhouse Gas Emission Reporting Regulation, B.C. Reg. 249/2015, s. 41.95 · last amended April 1, 2026 · read from BC Laws on November 17, 2026
The text
(1) In this section, "project reduction" has the same meaning as in section 11 (1) of the Emission Offset Project Regulation.
(2) The use of compliance units by the operator of a regulated operation to meet a compliance obligation for a compliance period under section 6 (2) (a) of the Act is subject to the following restrictions:
(a) the maximum number of compliance units that may be used is the number required to meet the compliance obligation for each compliance period as follows:
(i) for the 2024 compliance period, 50 percent of the excess emissions, rounded down to the nearest whole number of compliance units;
(ii) for the 2025 compliance period, 40 percent of the excess emissions, rounded down to the nearest whole number of compliance units;
(iii) for the 2026 compliance period and each subsequent compliance period, 30 percent of the excess emissions, rounded down to the nearest whole number of compliance units;
(b) an offset unit may be used only if the end of the calendar year in which the project reduction for which the offset unit was issued occurred is less than 3 years before the beginning of the compliance period.
Read the Greenhouse Gas Emission Reporting Regulation on BC Laws ↗
Made under Greenhouse Gas Industrial Reporting and Control Act, SBC 2014, c. 29.