Greenhouse Gas Emission Reporting Regulation, B.C. Reg. 249/2015
Section 16
Choice between direct measurement and mass balance-based methodology
Cite as Greenhouse Gas Emission Reporting Regulation, B.C. Reg. 249/2015, s. 16 · last amended April 1, 2026 · read from BC Laws on November 17, 2026
The text
(1) In this section, “mass balance-based methodology” means a methodology that involves quantifying emissions by applying the principle of mass conservation to the feedstock consumed and emissions or other substances produced by a process, and includes quantifying emissions by applying an emissions factor to a volume or mass of fuel or other feedstock.
(2) If, in circumstances authorized under this regulation, the operator has the option to choose between a direct measurement methodology and a mass balance-based methodology to quantify emissions, the operator must continue to use the chosen methodology for all future emission reports unless
(a) a change in methodology is approved in advance by the director, or
(b) the applicable emissions are less than the lower of the following:
(i) 20 000 tonnes of carbon dioxide equivalent;
(ii) 3% of the total emissions attributable to the reporting operation during the reporting period, not including carbon dioxide produced from biomass listed in item 1 of Schedule C.
(3) If, in circumstances authorized under this regulation, the operator has the option to choose between 2 or more direct measurement methodologies to quantify emissions, the operator must continue to use the chosen methodology for all future emission reports unless
(a) a change in methodology is approved in advance by the director,
(b) the change in methodology is to a higher numerically rated calculation method,
(c) the change in methodology is to a more accurate calculation method, or
(d) the applicable emissions are less than the lower of the following:
(i) 20 000 tonnes of carbon dioxide equivalent;
(ii) 3% of the total emissions attributable to the reporting operation during the reporting period, not including carbon dioxide produced from biomass listed in item 1 of Schedule C.
(4) For certainty, subsection (2) does not apply to an operator who, in respect of a previous reporting period or portion of a reporting period, had the option to choose between a direct measurement methodology and a mass balance-based methodology to quantify emissions, but no longer has that option because
(a) of the adoption of, or a change in, the methodologies specified for that source type in a code, standard or rule referred to in column 5 of Table 1 or 2 of Schedule A, or
(b) the emissions exceed the threshold for use of replacement methodologies under section 15 (6) (a).
(5) For certainty, subsection (3) does not apply to an operator who, in respect of a previous reporting period or portion of a reporting period, had the option to choose between 2 or more direct measurement methodologies to quantify emissions, but no longer has that option because
(a) of the adoption of, or a change in, the methodologies specified for that source type in a code, standard or rule referred to in column 5 of Table 1 or 2 of Schedule A, or
(b) the emissions exceed the threshold for use of replacement methodologies under section 15 (6) (a).
(6) The operator of a reporting operation previously operated by another operator must use the methodology chosen by the previous operator
(a) under subsection (2), unless paragraph (a) or (b) of that subsection applies, or
(b) under subsection (3), unless paragraph (a), (b), (c) or (d) of that subsection applies.
Read the Greenhouse Gas Emission Reporting Regulation on BC Laws ↗
Made under Greenhouse Gas Industrial Reporting and Control Act, SBC 2014, c. 29.