Solid Fuel Burning Domestic Appliance Regulation, B.C. Reg. 218/2016
Section 1
Definitions
Cite as Solid Fuel Burning Domestic Appliance Regulation, B.C. Reg. 218/2016, s. 1 · last amended March 30, 2022 · read from BC Laws on November 17, 2026
The text
In this regulation:
“appliance” means a device designed for burning solid fuel to produce heat for heating indoor spaces or cooking or for aesthetic enjoyment, but does not include
(a) barbecues,
(b) chimineas,
(c) outdoor fireplaces that are not used to heat indoor space,
(d) outdoor ovens, and
(e) solid fuel burning devices that
(i) have an output capacity rating greater than 150 kW, or
(ii) are certified by the manufacturer as having a maximum output capacity of greater than 150 kW;
“boiler” means an appliance in which fluid is heated and from which the heated fluid or steam is circulated through pipes for purposes that include heating spaces other than the space in which the boiler is located;
“camp stove” means an appliance
(a) that
(i) weighs not more than 20 kg, and
(ii) is designed to be portable for use when camping or picnicking or in remote locations where an easily transportable means of cooking or heating is needed, or
(b) that is labelled as a camp stove in accordance with the US standard;
“Canadian standard” means "CSA B415.1-10 Performance testing of solid-fuel-burning heating appliances", published by the Canadian Standards Association, as amended from time to time;
“certified”, in relation to an appliance, means an appliance,
(a) labelled in accordance with the Canadian standard, that
(i) after testing by an organization accredited by the Standards Council of Canada to test in accordance with the Canadian standard, is certified by the organization as meeting the requirements of the Canadian standard, or
(ii) is an appliance of the same model as an appliance described in subparagraph (i) and is, in all material respects, identical to that appliance, or
(b) labelled in accordance with the US standard, that
(i) after testing by an organization accredited by the United States Environmental Protection Agency to test in accordance with the US standard, is certified by the organization as meeting the requirements of the US standard, or
(ii) is an appliance of the same model as an appliance described in subparagraph (i) and is, in all material respects, identical to that appliance;
“cook stove” means an appliance
(a) that
(i) is designed primarily for cooking food, rather than heating space,
(ii) is equipped with
(A) an enclosed oven that has a volume greater than 0.028 m3, and
(B) a device for measuring the temperature of the oven, and
(iii) has a flame path capable of being routed around the oven, or
(b) that is labelled as a cook stove in accordance with the US standard;
“cordwood” means conventional firewood;
“factory-built fireplace” means an appliance, intended primarily for aesthetic enjoyment and consisting entirely of factory-built components assembled at the factory in accordance with the manufacturer's specifications,
(a) that does not have either an automatic or manual air or combustion control except
(i) a flue damper, or
(ii) an outside air damper that can only be adjusted to a fully closed or fully open position,
(b) that bears a permanent label
(i) of an organization accredited by the Standards Council of Canada, which label indicates the device is certified by the organization as meeting the requirements of the Underwriters Laboratories of Canada Inc. standard CAN/ULC—S610-M87, Standard for Factory-Built Fireplaces, or
(ii) of an organization accredited by a member of the International Accreditation Forum, which label indicates that the device is certified by the organization as meeting the requirements of the Underwriters Laboratories Inc. standard UL 127 Standard for Factory-Built Fireplaces, and
(c) the certification of which either
(i) permits use of the device only if the doors are fully open, or
(ii) permits the use of the device with the doors closed only if
(A) the doors are tempered glass panels, or
(B) the device has an opening that is at least 0.323 m3 (500 square inches);
“furnace” means an appliance, designed to be located outside ordinary living areas, in which air is heated and from which the heated air is distributed through ducts for heating spaces other than the space in which the furnace is located;
“masonry heater” means a free-standing appliance that
(a) is constructed primarily of masonry,
(b) has a mass of at least 800 kg, excluding the chimney and foundation, and
(c) is designed
(i) to absorb the heat from a rapidly burned charge of solid fuel by routing hot exhaust gases through internal heat exchange channels that include at least one 180 change in flow direction, and
(ii) to heat spaces by radiating the absorbed heat;
“outdoor boiler” means a boiler that is
(a) designed to be installed outdoors or in a structure not ordinarily used as living space, and
(b) specified by the manufacturer as suitable for outdoor installation or installation in structures not ordinarily used as living space;
“owner” means,
(a) in relation to a parcel registered in a land title office, the registered owner in fee simple, and
(b) in relation to any parcel, a person occupying the parcel;
“parcel”,
(a) in relation to land registered in a land title office, has the same meaning as in the Land Title Act, and
(b) in relation to any other land, means an area of land the boundaries of which are certain and that is held by an owner;
“pellet stove” means a stove that burns pelletized fuel to heat the space in which it is located;
“pelletized fuel” means processed fuel consisting of uniform, discrete pellets of compressed, dried biomass material;
“phase 2 qualified boiler” means a boiler that
(a) was manufactured by a person who, at the time of manufacture, was a party to an "EPA Hydronic Heater Program — Phase 2 Partnership Agreement" with the United States Environmental Protection Agency,
(b) has an average particulate matter emission rate of not more than 0.32 lb. per million BTU (0.1376 g/MJ), and a maximum particulate matter emission rate of not more than 18 g/hr, determined in accordance with "Test Method 28 OWHH for Measurement of Particulate Emissions and Heating Efficiency of Wood-Fired Hydronic Heating Appliances", published by the United States Environmental Protection Agency, and
(c) is labelled in accordance with Attachment 3 of the agreement referred to in paragraph (a);
“seasoned”, in relation to wood or wood products, means the wood or wood products contain not more than 20% moisture by weight;
“site-built masonry fireplace” means an appliance that is
(a) a wood burning fireplace of primarily masonry construction, and
(b) built or assembled at the site on which it is located;
“solid fuel” means
(a) untreated, seasoned wood or wood products, including, without limitation, cordwood, woodchips, sawdust and wood left over from cutting lumber to length,
(b) manufactured firelogs,
(c) pelletized fuel, and
(d) corn kernels and seed hulls;
“untreated”, in relation to wood or wood products, means the wood or wood products have not been treated with a preservative and have not been painted, varnished or coated with another substance;
“US standard” means the applicable of the following standards published by the United States Environmental Protection Agency, as amended from time to time:
(a) in relation to boilers and furnaces, the "Code of Federal Regulations, Title 40, Part 60, Subpart QQQQ — Standards of Performance for New Residential Hydronic Heaters and Forced-Air Furnaces";
(b) in relation to any other appliance, the "Code of Federal Regulations, Title 40, Part 60, Subpart AAA — Standards of Performance for New Residential Wood Heaters".
Read the Solid Fuel Burning Domestic Appliance Regulation on BC Laws ↗
Made under Environmental Management Act, SBC 2003, c. 53.