Drinking Water Protection Regulation, B.C. Reg. 200/2003
Section 8
Water monitoring analysis
Cite as Drinking Water Protection Regulation, B.C. Reg. 200/2003, s. 8 · last amended October 27, 2025 · read from BC Laws on November 17, 2026
The text
(1) A water supplier must transport water samples to a laboratory in accordance with the procedures established by a drinking water officer.
(2) For the purpose of section 11 (1) of the Act, a water supplier must monitor for total coliform bacteria and, effective April 1, 2006, Escherichia coli, at the frequencies set out in Schedule B of this regulation.
(3) Despite subsection (2), a drinking water officer may establish different sampling frequencies for a water supplier.
(4) A laboratory carrying out monitoring analyses for the parameters referred to in subsection (2) must be approved in writing by the Provincial health officer.
(5) If requested to do so by a drinking water officer, a laboratory must provide to the drinking water officer, the water supplier, or both, a report
(a) listing all water samples sent by the water supplier to the laboratory, and
(b) describing, for all samples analyzed, the results of any monitoring analyses for total coliform bacteria and Escherichia coli.
Read the Drinking Water Protection Regulation on BC Laws ↗
Made under Drinking Water Protection Act, SBC 2001, c. 9.