Special Purpose Areas Regulation, B.C. Reg. 153/2023

Section 16

Requirements for section 243 (1) of Act

Cite as Special Purpose Areas Regulation, B.C. Reg. 153/2023, s. 16 · last amended April 1, 2024 · read from BC Laws on November 17, 2026

The text

The requirements for the purposes of section 243 (1) [compensation for cutting permit under community forest agreement or woodlot licence] of the Act are as follows: (a) as a result of the special purpose area designation, the cutting permit has been impacted in one of the following ways: (i) the special purpose area overlaps the cutting permit area and the area of overlap is deleted under section 194 (1) [deletion of cutting permit area within licence area] of the Act; (ii) the special purpose area does not overlap the cutting permit area but there is no practicable means by which the holder can access the cutting permit area, or a portion of that area, for the purposes of harvesting timber in that area or portion; (b) the cutting permit was issued before the effective date of the special purpose area designation; (c) the rate of stumpage for timber authorized to be harvested under the cutting permit was determined, redetermined or varied using information provided by a relevant timber cruise; (d) in the case of a cutting permit impacted in the way described in paragraph (a) (ii) of this section, the holder has provided an impact statement and additional information in accordance with section 5 [impact statements] of this regulation.
Read the Special Purpose Areas Regulation on BC Laws ↗

Made under Forest Act, RSBC 1996, c. 157.