Energy Efficiency Standards Regulation, B.C. Reg. 14/2015

Section 46

Type 2 general purpose electric motors

Cite as Energy Efficiency Standards Regulation, B.C. Reg. 14/2015, s. 46 · last amended April 24, 2023 · read from BC Laws on November 17, 2026

The text

(1) For the purposes of the efficiency standards table in section 47 [efficiency standards for general purpose electric motors] and the table in section 49 [nominal full load efficiency for type 2 general purpose electric motors], a general purpose electric motor is a type 2 general purpose electric motor if the general purpose electric motor has all of the following characteristics: (a) a rated size of 1 to 200 hp, or an IEC design motor of a size of 0.746 to 150 kW; (b) a 2-, 4- or 6-pole construction; (c) a NEMA T frame, or IEC frame designation of 90 or above; (d) a NEMA design A or B, or IEC design N; (e) a standard shaft, R-shaft or S-shaft or an IEC equivalent. (2) For the purposes of the efficiency standard referred to in column 4 in item 2 of the efficiency standards table in section 47, the applicable minimum nominal full load efficiency of a type 2 general purpose electric motor is determined by using the table in section 49, as follows: (a) for an open motor with a rated power set out in column 1 of the table in section 49, the applicable minimum nominal full load efficiency is the motor efficiency set out in column 2 (i) opposite the rated power of the open motor, and (ii) in the sub-column that corresponds to the number of poles in the open motor; (b) for an enclosed motor with a rated power set out in column 1 of the table in section 49, the applicable minimum nominal full load efficiency is the motor efficiency set out in column 3 (i) opposite the rated power of the enclosed motor, and (ii) in the sub-column that corresponds to the number of poles in the enclosed motor.
Read the Energy Efficiency Standards Regulation on BC Laws ↗

Made under Energy Efficiency Act, RSBC 1996, c. 114.