Energy Efficiency Standards Regulation, B.C. Reg. 14/2015
Section 4
Designated testers
Cite as Energy Efficiency Standards Regulation, B.C. Reg. 14/2015, s. 4 · last amended April 24, 2023 · read from BC Laws on November 17, 2026
The text
(1) In this section, “certification program” means a program of verification using standard testing procedures.
(2) For the purposes of verifying an energy device, the following persons, agencies or organizations are designated, and authorized as indicated, to make the verification:
(a) inspectors designated under section 3 (1) [inspection and testing] of the Act are authorized to verify any energy device;
(b) persons or organizations accredited by the Standards Council of Canada as certification bodies are authorized to verify any energy device to which the certification relates;
(c) agencies accredited by the NFRC as independent certification and inspection agencies are authorized to verify any manufactured fenestration product;
(d) professional engineers, and architects authorized to practise in British Columbia, are authorized to verify the following:
(i) door slabs referred to in column 1 in item 1 of the efficiency standards table in section 27 [efficiency standards for manufactured fenestration products];
(ii) glazing products referred to in column 1 in item 2 of the efficiency standards table in section 27;
(iii) manufactured fenestration products, other than door slabs and glazing products referred to in subparagraphs (i) and (ii) of this paragraph, that
(A) are designed for a specific building, or
(B) fall outside the scope of a certification program;
(e) certification bodies are authorized to verify any computer or computer monitor if the certification bodies
(i) are accredited under an International Accreditation Forum Multilateral Recognition Arrangement based on ISO/IEC 17065, and
(ii) maintain an internet accessible product listing.
(3) Professional engineers and architects referred to in subsection (2) (d) must
(a) verify manufactured fenestration products referred to in subsection (2) (d) (iii) (A) of this section in the manner described in section 25 [efficiency standard exemption for manufactured fenestration products designed for specific buildings], and
(b) verify manufactured fenestration products referred to in subsection (2) (d) (iii) (B) of this section in the manner described in section 26 [calculation of U-value for atypical manufactured fenestration products].
Read the Energy Efficiency Standards Regulation on BC Laws ↗
Made under Energy Efficiency Act, RSBC 1996, c. 114.