Energy Efficiency Standards Regulation, B.C. Reg. 14/2015

Section 39

Definitions

Cite as Energy Efficiency Standards Regulation, B.C. Reg. 14/2015, s. 39 · last amended April 24, 2023 · read from BC Laws on November 17, 2026

The text

In this Part: “ANSI C78.79-2014” means ANSI standard ANSI C78.79-2014 entitled Nomenclature for Envelope Shapes Intended for Use with Electric Lamps; “ANSI C81.64-2005” means ANSI standard ANSI C81.64-2005 entitled Guidelines and General Information for Electric Lamp Bases, Lampholders, and Gauges; “CAN/CSA C239-94” means CSA standard CAN/CSA C239-94 entitled Performance Standard for Dusk-to-Dawn Luminaires; “CAN/CSA C654-M91” means CSA standard CAN/CSA C654-M91 entitled Fluorescent Lamp Ballast Efficacy Measurements; “CAN/CSA C819-95” means CSA standard CAN/CSA C819-95 entitled Performance of General Service Fluorescent Lamps; “CAN/CSA C861-10” means CSA standard CAN/CSA C861-10 (R2015) entitled Performance of self-ballasted compact fluorescent lamps and ballasted adapters; “CAN/CSA C861-95” means CSA standard CAN/CSA C861-95 entitled Performance of Compact Fluorescent Lamps and Ballasted Adapters; “CIE 13.3-1995” means CIE standard CIE 13.3-1995 entitled Method of Measuring and Specifying Colour Rendering Properties of Light Sources; “compact fluorescent lamp” means a self-ballasted compact fluorescent lamp that incorporates a screwbase; “CRI” means colour rendering index; “dusk-to-dawn area luminaire” means a 120 volt input, 60 Hz luminaire that has a photocell controller and provides automatic dusk-to-dawn area illumination; “fluorescent lamp ballast for a 120 volt input” means a fluorescent lamp ballast that is designed (a) for a 120 volt input, and (b) to operate F32T8 rapid-start fluorescent lamps that have a CRI of greater than 75; “fluorescent lamp ballast other than for a 120 volt input” means a fluorescent lamp ballast in a fluorescent luminaire installed in an industrial, a commercial or a residential location, but does not include a fluorescent lamp ballast for a 120 volt input; “general service incandescent lamp” has the same meaning as "general service lamp" in section 433 (1) [definition of general service lamp] of the federal regulation but does not include a lamp described in section 434 (2) (a) [limits] of that regulation; “IES” means the Illuminating Engineering Society; “IES LM-45-15” means IES standard IES LM-45-15 entitled IES Approved Method for the Electrical and Photometric Measurement of General Service Incandescent Filament Lamps; “IES LM-49-12” means IES standard IES LM-49-12 entitled IES Approved Method For Life Testing of Incandescent Filament Lamps; “IES LM-65-14” means IES standard IES LM-65-14 entitled IES Approved Method for Life Testing of Single-Based Fluorescent Lamps; “IES LM-79-08” means IES standard IES LM-79-08 entitled IES Approved Method for Electrical and Photometric Measurements of Solid-State Lighting Products; “IES LM-84-14” means IES standard IES LM-84-14 entitled IES Approved Method for Measuring Luminous Flux and Color Maintenance of LED Lamps, Light Engines, and Luminaires; “IES TM-28-14” means IES standard IES TM-28-14 entitled Projecting Long-Term Luminous Flux Maintenance of LED Lamps and Luminaires; “modified spectrum lamp” has the same meaning as in section 424 [definitions] of the federal regulation; “small diameter directional lamp” means a non-tubular lamp that (a) has a diameter of not more than 57 mm, (b) has at least 80% of light output within a solid angle of π steradians, (c) has a base type of E26, G4, GU5.3, GU10 or GX5.3, (d) has a luminous flux of more than 150 lm, and (e) is designed to operate at a nominal voltage of 11 to 13 volts or 110 to 130 volts, but does not include a lamp excluded under section 39.1.
Read the Energy Efficiency Standards Regulation on BC Laws ↗

Made under Energy Efficiency Act, RSBC 1996, c. 114.