Energy Efficiency Standards Regulation, B.C. Reg. 14/2015

Section 37

Installation of household electric storage-type water heaters

Cite as Energy Efficiency Standards Regulation, B.C. Reg. 14/2015, s. 37 · last amended April 24, 2023 · read from BC Laws on November 17, 2026

The text

(1) A responsible person must ensure that a functioning heat trap is installed with a household electric storage-type water heater, as follows: (a) in the case of a household electric storage-type water heater with a top inlet, at the water inlet and at the water outlet; (b) in the case of a household electric storage-type water heater with a bottom inlet, at the water outlet. (2) A responsible person must also ensure that insulation with a minimum RSI of 0.70 m2×K/W, as determined in accordance with ASTM C518-10, is installed with the heat trap required under subsection (1), as follows: (a) in the case of a heat trap that is integrally connected to the household electric storage-type water heater, (i) on the first 3 metres of exposed water inlet piping upstream of the hot water storage tank, and (ii) on the first 3 metres of exposed water outlet piping downstream of the hot water storage tank; (b) in the case of a heat trap that is independently attached to the household electric storage-type water heater, (i) on the first 3 metres of exposed water inlet piping upstream of the hot water storage tank, (ii) on the first 3 metres of exposed water outlet piping downstream of the hot water storage tank, and (iii) on the water inlet and water outlet piping between the hot water storage tank and the heat trap.
Read the Energy Efficiency Standards Regulation on BC Laws ↗

Made under Energy Efficiency Act, RSBC 1996, c. 114.