Energy Efficiency Standards Regulation, B.C. Reg. 14/2015
Section 11
Definitions
Cite as Energy Efficiency Standards Regulation, B.C. Reg. 14/2015, s. 11 · last amended April 24, 2023 · read from BC Laws on November 17, 2026
The text
In this Part:
“C381.2-17” means CSA standard C381.2-17 entitled Energy performance of battery-charging systems and uninterruptible power supplies;
“CAN/CSA C381.2-14” means CSA standard CAN/CSA C381.2-14 entitled Test method for determining the energy efficiency of battery-charging systems;
“CAN/CSA C62301-07” means CSA standard CAN/CSA C62301-07 entitled Household Electrical Appliances — Measurement of Standby Power;
“CAN/CSA C62301-11” means CSA standard CAN/CSA C62301-11 entitled Household electrical appliances — Measurement of standby power;
“compact audio product” has the same meaning as in the federal regulation;
“consumer battery charging system” means a battery charging system, including a battery charging system built into another product, that
(a) has an input capacity of less than 2 kW, and
(b) is distributed primarily for personal use by individuals,
but does not include a battery charging system excluded under section 12;
“E24”, in relation to a consumer battery charging system, means the energy consumption of the consumer battery charging system, in watt-hours, over a 24 hour period when the consumer battery charging system is charging or maintaining the batteries;
“Eb”, in relation to a consumer battery charging system, means the total capacity, in watt-hours, of all the batteries in the system;
“Ebatt”, in relation to a consumer battery charging system, means the energy, in watt-hours, delivered by the consumer battery charging system;
“N”, in relation to a consumer battery charging system, means the number of charger ports;
“PM”, in relation to a consumer battery charging system, means power usage in maintenance mode, which is the state the consumer battery charging system is in when
(a) the consumer battery charging system is connected to the main electricity supply, and
(b) the battery is fully charged, but is still connected to the consumer battery charging system;
“PO”, in relation to a consumer battery charging system, means power usage in no-battery mode, which is the state the consumer battery charging system is in when
(a) the consumer battery charging system is connected to the main electricity supply,
(b) the consumer battery charging system is not connected to the battery, and
(c) each manual on-off switch, if any, is turned on;
“UEC”, in relation to a consumer battery charging system, means the unit energy consumption of the consumer battery charging system expressed in kilowatt-hours per year, or kWh/yr;
“video product” has the same meaning as in the federal regulation.
Read the Energy Efficiency Standards Regulation on BC Laws ↗
Made under Energy Efficiency Act, RSBC 1996, c. 114.