Energy Efficiency Standards Regulation, B.C. Reg. 14/2015
Section 1
Definitions
Cite as Energy Efficiency Standards Regulation, B.C. Reg. 14/2015, s. 1 · last amended April 24, 2023 · read from BC Laws on November 17, 2026
The text
In this regulation:
“Act” means the Energy Efficiency Act;
“ANSI” means the American National Standards Institute;
“applicable efficiency standard”, in relation to an energy device, means each efficiency standard that applies to the energy device under section 7 [prescribed efficiency standards] or, if applicable, section 8 [early adoption of future efficiency standards];
“ASTM” means the American Society for Testing and Materials International;
“ASTM C518-04” means ASTM standard ASTM C518-04 entitled Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus;
“ASTM C518-10” means ASTM standard ASTM C518-10 entitled Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus;
“BTU” means British thermal units;
“CIE” means the Commission internationale de l'éclairage, or International Commission on Illumination;
“CSA” means the Canadian Standards Association;
“designated tester”, in relation to an energy device, means a person, agency or organization that, under section 4 [designated testers], is designated and authorized to verify the energy device;
“efficiency standards table” means a table referred to in section 2 [prescribed energy devices];
“energy efficiency verification label” means a label required under section 5 (1);
“federal Act” means the Energy Efficiency Act (Canada);
“federal minister” has the same meaning as "Minister" in the federal Act;
“federal regulation” means the Energy Efficiency Regulations, 2016 made under the federal Act;
“IEC” means the International Electrotechnical Commission;
“ISO” means the International Organization for Standardization;
“ISO/IEC 17065” means ISO/IEC standard ISO/IEC 17065 entitled Conformity assessment — Requirements for bodies certifying products, processes and services;
“label” means a printed decal, stamped plate or other permanent marking;
“manufactured fenestration product” means an energy device referred to in column 1 of the efficiency standards table in section 27 [efficiency standards for manufactured fenestration products];
“manufacturing information label” means a label required under section 6 (1);
“NFRC” means the National Fenestration Rating Council;
“RSI” means an R-value expressed in SI units of metre squared Kelvin per watt, or m2×K/W;
“verify” means applying a testing procedure to determine whether an energy device meets an applicable efficiency standard.
Read the Energy Efficiency Standards Regulation on BC Laws ↗
Made under Energy Efficiency Act, RSBC 1996, c. 114.