Forest Planning and Practices Regulation, B.C. Reg. 14/2004

Section 43.1

Secondary structure retention in mountain pine beetle affected stands

Cite as Forest Planning and Practices Regulation, B.C. Reg. 14/2004, s. 43.1 · last amended January 1, 2026 · read from BC Laws on November 17, 2026

The text

(1) A holder of a cutting permit, a forestry licence to cut that does not provide for cutting permits or a timber sale licence must not carry out timber harvesting in a targeted pine leading stand, unless (a) it is necessary to fell or modify a tree that is a safety hazard and there is no other practicable option for addressing the safety hazard, (b) the harvesting is necessary to construct a road in the targeted pine leading stand and there is no other practicable option for locating the road, or (c) at the conclusion of timber harvesting, the holder retains an adequate stocking density of suitable secondary structure. (2) Despite subsection (1), a holder of a cutting permit, a forestry licence to cut that does not provide for cutting permits or a timber sale licence may harvest timber in a targeted pine leading stand without retaining an adequate stocking density of suitable secondary structure if (a) the timber in the stand is subject to a significant risk of blowdown, (b) at the time of harvesting, at least 30% of the pine trees in the stand contain live mountain pine beetles, (c) harvesting the timber is necessary to protect a community, or other area agreed to by the minister prior to harvesting, from wildfire, or (d) harvesting the timber is necessary to facilitate collection of tree seed and the resulting opening does not exceed 1 ha. (3) Without limiting the stocking standards applicable under section 29 (1) or (2) of the Act or section 46 of this regulation, if a person referred to in subsection (1) (c) carries out harvesting in a targeted pine leading stand that creates an obligation to establish a free growing stand, each tree of suitable secondary structure retained in the stand is considered to be a tree of a preferred species for the purpose of establishing a free growing stand on the area where the adequate stocking density of suitable secondary structure was retained. (4) This section does not apply to (a) an occupant licence to cut or a master licence to cut that provides for cutting permits, (b) a forestry licence to cut entered into by a timber sales manager, (c) a road permit, (d) a community forest agreement, (e) an area that is subject to (i) a cutting permit that has been issued, (ii) a timber sale licence that has been advertised or entered into, or (iii) a forestry licence to cut that does not provide for cutting permits which has been entered into by the regional manager or district manager, before this section comes into force, (f) an area that is subject to a cutting permit, a forestry licence to cut that does not provide for cutting permits or a timber sale licence if the timber cruising or field layout for the cutting permit, forestry licence to cut or timber sale licence has been completed before this section comes into force, (g) a cutblock, if the cutblock has been specified in a forest stewardship plan as an area to which section 196 (1) (a) of the Act applies, or (h) an area depicted on a government-endorsed forest cover map which indicates that lodgepole pine is the leading tree species if a timber cruise of the timber on the area, or other process agreed to by the minister prior to harvesting, shows that lodgepole pine is not the leading tree species.
Read the Forest Planning and Practices Regulation on BC Laws ↗

Made under Forest and Range Practices Act, SBC 2002, c. 69.