Home Inspector Licensing Regulation, B.C. Reg. 12/2009

Section 12

Home inspection contract requirements

Cite as Home Inspector Licensing Regulation, B.C. Reg. 12/2009, s. 12 · last amended August 1, 2026 · read from BC Laws on November 17, 2026

The text

(1) In addition to any information required under sections 18.2, 20 and 23 of the Act to be contained in a home inspection contract, a home inspection contract must (a) contain the address of the property to be inspected, (b) specify what will be covered by the home inspection, (c) state whether or not the licensee will inspect for mould, (d) state whether or not the licensee will inspect for asbestos, (e) state that the home inspection will be non-invasive or specify the invasive procedures that will be used, and (f) contain the following statement: Home inspectors operating in British Columbia are required to be licensed under the Business Practices and Consumer Protection Act and are regulated under that Act. The services of a home inspector are not provided on behalf of, or in affiliation with, the Province of British Columbia or the Business Practices and Consumer Protection Authority (commonly known and doing business as Consumer Protection BC). For more information on the regulation of home inspectors, what a home inspection should involve, how to select a home inspector and about your rights as a consumer, please contact Consumer Protection BC. (2) A licensee must not, in a home inspection contract, (a) exclude from the home inspection a garage or carport, whether or not the garage or carport is attached to a dwelling, (b) purport to limit the liability, or the amount of the liability, of the licensee, or (c) purport to limit the time for making a claim against the licensee.
Read the Home Inspector Licensing Regulation on BC Laws ↗

Made under Business Practices and Consumer Protection Act, SBC 2004, c. 2.