Homeowner Protection Act Regulation, B.C. Reg. 29/99
Section 1
Definitions
Cite as Homeowner Protection Act Regulation, B.C. Reg. 29/99, s. 1 · last amended March 6, 2024 · read from BC Laws on November 17, 2026
The text
(1) In the Act and this regulation:
“Act” means the Homeowner Protection Act;
“building code” means, as applicable,
(a) the British Columbia Building Code established under the Building Act, or
(b) the Vancouver Building Bylaw established under the Vancouver Charter;
in force at the time that the building permit was issued for the new home or, in jurisdictions where a building permit is not required, in force when construction commences;
“building envelope” means the assemblies, components and materials of a new home which are intended to separate and protect the interior space of the new home from the adverse affects of exterior climatic conditions;
“common property” has the same meaning as in the Strata Property Act, but does not include land;
“cooperative” means a building, or a portion of a building, provided for residential occupancy purposes to members of an association incorporated or continued under the Cooperative Association Act;
“defect” means any design or construction that is contrary to the building code or that requires repair or replacement due to the negligence of a residential builder or person for whom the residential builder is responsible at law;
“defects in the building envelope” means defects that result in the failure of the building envelope to perform its intended function;
“developer” means a residential builder that sells the residential builder's ownership in a new home, and includes a vendor that contracts with a general contractor for the construction of a new home;
“driveway” means a surface intended and constructed primarily to be used for vehicular access to or from a new home;
“dwelling unit” means a class of new home which is a building, or a portion of a building, that
(a) is newly constructed,
(b) is intended for residential occupancy,
(c) is a single, self-contained residence usually containing cooking, eating, living, sleeping and sanitary facilities, and
(d) may contain a secondary suite if permitted by local bylaws;
“factory built home” means a home which is governed by or required to be certified under CSA standard CAN/CSA-A277;
“general contractor” means a residential builder that is engaged under contract by an owner, developer or vendor to perform or cause to be performed all or substantially all of the construction of a new home, and includes a construction manager and project manager;
“home warranty insurance” has the same meaning as in section 141 (1) of the Insurance Act;
“load bearing” means subjected to or designed to carry loads in addition to its own dead load, but does not include a wall element subjected only to wind or earthquake loads in addition to its own dead load;
“manufactured home” means a factory built home or a mobile home;
“mobile home” means a home which is governed by or required to be certified under CSA standard CSA-Z240;
“multi-unit building” means a building containing 2 or more dwelling units together with associated common property, if any;
“nominee” means an individual who is nominated in accordance with section 1.1 by an applicant for, or a holder of, a residential builder licence;
“Part 3 residential building” means a building that is
(a) used for residential occupancy, and
(b) subject to the requirements of section 2.2.7 of Division C of Part 2 and Division B of Part 3 of the building code;
“Part 9 residential building” means a building that is subject to the requirements of Part 9 of the building code;
“partner” and “partnership” have the same meaning as in the Partnership Act;
“personal use”, in relation to an owner builder, means residential occupancy by the owner builder and does not include rental use;
“rental purposes” means an occupancy or intended occupancy which is or would be governed by a tenancy agreement as defined in section 1 of the Residential Tenancy Act;
“secondary suite” means a suite located in and forming part of a dwelling unit where the dwelling unit remains as a single legal title;
“structural defect” means
(a) any defect in materials and labour that results in the failure of a load-bearing part of the new home, and
(b) any defect that causes structural damage that materially and adversely affects the use of the new home for residential occupancy;
“vendor of a new home”, for the purposes of section 23 (1) of the Act, does not include a person who purchased a new home from the residential builder or owner builder of that new home;
“walkway” means a surface intended and constructed primarily to be used as a pedestrian access to or from a new home, and may include stairs.
(2) For the purposes of the Act and this regulation, “new home” includes
(a) a non-residential building, or portion thereof, converted to use for residential occupancy and sale, and
(b) a cooperative.
(3) If a residential builder or owner is more than one person, the obligation of each person is deemed to be joint and several.
Read the Homeowner Protection Act Regulation on BC Laws ↗
Made under Insurance Act, RSBC 2012, c. 1.