Petroleum and Natural Gas Drilling Licence and Lease Regulation, B.C. Reg. 10/82

Section 4.01

Earned lease dimensions

Cite as Petroleum and Natural Gas Drilling Licence and Lease Regulation, B.C. Reg. 10/82, s. 4.01 · last amended September 1, 2023 · read from BC Laws on November 17, 2026

The text

(1) The maximum number of gas spacing areas that may be included in the location of an earned lease is (a) based on (i) the length of the well bore of the earning well used to earn the lease, and (ii) the term of the drilling licence, as determined under section 3 (3), the location of which includes the gas spacing area for which the director designated the earning well, and (b) determined as follows: (i) in the case of an earning well designated for a gas spacing area in the location of a drilling licence with a term determined on the basis that the location is in Area 1 of Schedule 2, the maximum number is set out in Column 2 of Schedule 1 opposite the length of the well bore, set out in Column 1, that the director determines was necessary to evaluate a zone in a gas spacing area; (ii) in the case of an earning well designated for a gas spacing area in the location of a drilling licence with a term determined on the basis that all or part of the location is in Area 2 of Schedule 2, the maximum number is set out in Column 3 of Schedule 1 opposite the length of the well bore, set out in Column 1, that the director determines was necessary to evaluate a zone in a gas spacing area; (iii) in the case of an earning well designated for a gas spacing area in the location of a drilling licence with a term determined on the basis that all or part of the location is in Area 3 of Schedule 2, the maximum number is set out in Column 4 of Schedule 1 opposite the length of the well bore, set out in Column 1, that the director determines was necessary to evaluate a zone in a gas spacing area. (2) If the director has designated more than one earning well in the location of a drilling licence, the maximum number of gas spacing areas that may be included in the location of an earned lease is the sum of the maximum number of gas spacing areas, as determined under subsection (1), for the earning wells. (3) In an application referred to in section 4 (2) (b), the holder of a drilling licence may select any zone in a gas spacing area that is in the location of the drilling licence, subject to the following restrictions: (a) the number of gas spacing areas included in the location may not exceed the number specified under subsection (1) or (2), as applicable; (b) the deepest zone that may be included in the location is the deepest zone evaluated by means of the earning well on the basis of which the gas spacing area is eligible for inclusion in the location.
Read the Petroleum and Natural Gas Drilling Licence and Lease Regulation on BC Laws ↗

Made under Petroleum and Natural Gas Act, RSBC 1996, c. 361.