Code of Practice for Soil Amendments, B.C. Reg. 210/2007
Section 8
Requirement for a land application plan
Cite as Code of Practice for Soil Amendments, B.C. Reg. 210/2007, s. 8 · last amended October 9, 2025 · read from BC Laws on November 17, 2026
The text
(1) If more than 5 m3 of soil amendments will be applied to an application site in a year, before applying the soil amendments the discharger must have a plan prepared in accordance with this section.
(2) A plan required under subsection (1) must
(a) be prepared and signed by a qualified professional, and
(b) provide all the following information:
(i) the full name and address of the facility where the soil amendments are produced;
(ii) the name, address and telephone number of an individual who is located at or near the application site and is the local contact for the discharger;
(iii) the full name and address of the qualified professional preparing the plan;
(iv) the name of the registered owner of the application site and the written authorization of that registered owner, or the agent of that registered owner, for that application of the soil amendments;
(v) the street address and legal description of the application site;
(vi) the latitude and longitude, and a description of the boundaries, of the application site;
(vii) a map or plan showing the location of the application site;
(viii) the intended dates for each application of soil amendments to the application site in the year;
(ix) conditions, specific to the application site, that may adversely impact the effective application or storage of the soil amendments or the beneficial use of the soil amendments, including, without limiting this, the gradient, drainage issues and type of groundcover;
(x) a physical description of the constituents, including foreign matter, of the soil amendments;
(xi) the street address and legal description of each storage facility and storage site where soil amendments intended to be applied to the application site will be stored;
(xii) a map or plan showing the location of those storage facilities and storage sites.
(3) A plan required under subsection (1) must provide
(a) the following information in relation to the soil amendments to be applied:
(i) moisture content expressed as a percentage of total weight;
(ii) the concentration of each substance set out in the table in section 6 expressed in µg/g of dry weight;
(iii) Total Kjeldahl Nitrogen (TKN) expressed in µg/g of dry weight;
(iv) ammonia plus ammonium and nitrate nitrogen expressed in µg/g of dry weight;
(v) plant-available phosphorus and potassium expressed in µg/g of dry weight;
(vi) if the soil amendments are those described in paragraph (b) of the definition in section 1 and include domestic sewage, the fecal coliform density expressed as MPN per gram by dry weight of total solids;
(vii) pH and electrical conductivity;
(viii) the application rate for the year, in dry tonnes per hectare, required to obtain the necessary fertilizer nutrient levels or soil conditioner levels to establish or sustain the intended crops or other vegetation on the land and minimize the potential for adverse environmental impacts, and
(b) the following information about the soil at the application site:
(i) a calculation of soil conditioner or crop nutrient requirements:
(ii) the pH and electrical conductivity before the first application of soil amendments and the projected pH and electrical conductivity before each subsequent application of soil amendments;
(iii) the concentration of each substance set out in the table in section 6, expressed in µg/g of dry weight, before the first application of the soil amendments and the projected concentrations, expressed in µg/g of dry weight, of each of those substances before each subsequent application of soil amendments.
(4) A plan required under subsection (1) must set out the following management methods or processes:
(a) management methods or processes to reduce or prevent the transmission of pathogens by vectors;
(b) the management methods that will be implemented at the storage facilities and storage sites at which the soil conditioners are stored to prevent the formation of leachate;
(c) if the fecal coliform density reported under subsection (3) (a) (i) is greater than or equal to 1 000 MPN per gram by dry weight of total solids, the management processes that will be implemented to prevent the spread of disease;
(d) the management methods or processes that will be implemented to address specific site conditions identified under subsection (2) (b) (ix);
(e) if the proposed application rates exceed the annual soil conditioning or crop nutrient requirements,
(i) a process for monitoring the composition of the soil on land to which soil amendments have been applied, and
(ii) a statement of the potential changes in the soil and vegetation quality the proposed application rates will cause.
Read the Code of Practice for Soil Amendments on BC Laws ↗
Made under Public Health Act, SBC 2008, c. 28.