Safety Standards General Regulation, B.C. Reg. 105/2004

Section 28

Safety officer certificate of qualification

Cite as Safety Standards General Regulation, B.C. Reg. 105/2004, s. 28 · last amended October 1, 2022 · read from BC Laws on November 17, 2026

The text

(1) An individual may apply under section 2 for a certificate of qualification as a safety officer. (2) A certificate of qualification issued under subsection (1) may restrict the areas of British Columbia to which the certificate of qualification applies. (3) A provincial safety manager may require an applicant to take an examination for a safety officer's certificate of qualification, and, if so, the examination must (a) be set by a provincial safety manager, (b) be held at a place and time selected by a provincial safety manager, and (c) be held only after written notification to the applicant of the time and place of the examination. (4) A safety officer who holds a safety officer's certificate of qualification under this section, while employed by a regulatory authority, must not perform for anyone other than their employer inspections of regulated work or regulated products in the discipline for which the certificate of qualification is issued.
Read the Safety Standards General Regulation on BC Laws ↗

Made under Safety Standards Act, SBC 2003, c. 39.