Gas Safety Regulation, B.C. Reg. 103/2004

Section 39

Procedures for excavations

Cite as Gas Safety Regulation, B.C. Reg. 103/2004, s. 39 · last amended May 1, 2025 · read from BC Laws on November 17, 2026

The text

(1) A person must not excavate or cause any excavating to be done in the vicinity of a gas installation that is or could be in any way damaging or dangerous to a gas installation. (2) A person who intends to excavate must, at least 2 business days before the person intends to excavate, request from the gas company serving that area, or its agent, information on the location of all underground gas installations in the vicinity of the proposed excavation. (3) A person must not excavate until (a) the person ascertains that a request has been made under subsection (2) and (i) the information was provided by the gas company under subsection (5) and that information revealed that there is no gas installation in the vicinity, or (ii) the information was provided by the gas company under subsection (5) and that information revealed that there is a gas installation in the vicinity and that installation has been indicated in accordance with subsection (5), and (b) the person ascertains that information provided by the gas company in respect of the lack of indicators under paragraph (a) (i) or the presence of indicators under paragraph (a) (ii) was supplied by the gas company within 10 days before beginning of the excavation. (4) If the excavator is not satisfied under subsection (3) (b), the person must verify the information with the gas company before excavating. (5) On receiving a request under subsection (2) a gas company must (a) provide the information requested within 2 business days, and (b) in a manner that is clear and easily understood, indicate the location of gas installations owned or operated by it in the area where the excavation is intended to be made by one or more of the following methods as appropriate for conditions at the excavation site: (i) providing a plan or listing of facility locations by measurement from an ascertainable point on the surface; (ii) surface staking; (iii) surface marking. (6) Prelocated or marked gas installations must be considered to lie within a zone equal to the diameter of the gas installation plus one metre on either side of the location indicated by the gas company under subsection (5). (7) The indicated location of gas installations must be confirmed by the excavator by means of hand digging and the excavator must expose the gas installations at a sufficient number of locations to determine their exact positions and depths before using mechanized excavation equipment for any purpose other than breaking the surface cover. (8) For existing gas installations of non-metallic material not provided with tracer wires, the gas company must, on request, indicate the location, including all changes in direction, of the installation by stakes or paint or both, at intervals not exceeding 100 metres, and subsection (7) applies. (9) If an excavator finds that the gas installation is not within the limits described by the gas company, (a) the excavator must so advise the gas company, (b) the gas company must immediately assist in locating and exposing the installation for the excavator, and (c) mechanized excavation must not be carried on in the vicinity until the installation has been located and exposed. (10) As the excavation work progresses, the excavator must (a) maintain and keep visible all markings placed by the gas company that identify the location of the gas installation, or (b) if it is impractical to maintain the markings, make other arrangements to ensure that the location of the gas installation is obvious to any observer.
Read the Gas Safety Regulation on BC Laws ↗

Made under Safety Standards Act, SBC 2003, c. 39.