Greenhouse Gas Reduction (Clean Energy) Regulation, B.C. Reg. 102/2012
Section 8.2
Carbon intensity
Cite as Greenhouse Gas Reduction (Clean Energy) Regulation, B.C. Reg. 102/2012, s. 8.2 · last amended July 24, 2026 · read from BC Laws on November 17, 2026
The text
(1) In this section:
“carbon dioxide equivalent” means the mass of carbon dioxide that would produce the same global warming impact as a given mass of another greenhouse gas, as determined in accordance with section 2 of the Low Carbon Fuels (Technical) Regulation;
“carbon intensity” has the same meaning as in section 1 of the Low Carbon Fuels Act;
“gCO2e/MJ” means grams of carbon dioxide equivalent per megajoule of energy;
“GHGenius” means the spreadsheet model of that name designed for analyzing the components attributable to the stages of the life cycles of fuels for the purpose of determining all greenhouse gases resulting from the production and use of those fuels;
“greenhouse gas” has the same meaning as in section 1 of the Climate Change Accountability Act;
“higher heating value” means a measure of heat content based on the gross energy content of a combustible fuel;
“ISO” means the International Organization for Standardization;
“ISO 14044:2006” means ISO standard entitled Environmental management — Life cycle assessment — Requirements and guidelines, published in July 2006;
“reference date” means the date
(a) a public utility decides to construct or purchase a production facility for the purposes of section 2.2 (3) (a) (iii), or
(b) a contract for purchase is signed for the purposes of section 2.2 (3) (a) (ii), 6, 7, 8 or 8.1;
“verification body” means a person that is accredited as a verification body by, and is in good standing with, a member of the International Accreditation Forum.
(2) For the purposes of the definition of "carbon intensity" in subsection (1),
(a) greenhouse gas emissions attributable to fuel are the total greenhouse gas emissions from all stages in the life cycle of the fuel, as calculated using the most recent version of GHGenius available on the reference date, and
(b) the expected use of the fuel is for transportation, unless the public utility reasonably expects that the fuel will be used for another purpose.
(3) For the purposes of sections 2.2 (3) (a), 6 (b), 7 (2) (a), 8 (1) (a) and 8.1 (1) (a), an undertaking is a prescribed undertaking only if the renewable natural gas, hydrogen, synthesis gas or lignin, as the case may be, that is acquired by the public utility has a carbon intensity that does not exceed 30.8 gCO2e/MJ
(a) as forecast in accordance with subsection (4),
(b) as determined in accordance with subsection (5), and
(c) as verified in accordance with subsection (6).
(4) The carbon intensity described in subsection (3) must be forecast
(a) within a reasonable time before the reference date,
(b) for the entire duration of the undertaking, and
(c) based on higher heating value.
(5) The carbon intensity described in subsection (3) must,
(a) during the undertaking, be determined every 3 years, or at any other interval specified by the commission, and
(b) at the conclusion of the undertaking, be determined for the entire duration of the undertaking.
(6) The carbon intensity forecast or determined for the purposes of subsection (3) is verified if the public utility provides to the commission a statement by a verification body that
(a) attests to the fair and accurate representation of the data used to forecast or determine the carbon intensity, and
(b) is prepared in accordance with ISO 14044:2006.
(7) If, in a single undertaking, a public utility purchases renewable natural gas, hydrogen, synthesis gas or lignin that is produced at multiple production facilities, each delivery of the renewable natural gas, hydrogen, synthesis gas or lignin produced at each facility must meet the criteria described in subsection (3).
Read the Greenhouse Gas Reduction (Clean Energy) Regulation on BC Laws ↗
Made under Clean Energy Act, SBC 2010, c. 22.