Elevating Devices Safety Regulation, B.C. Reg. 101/2004
Section 47
Link chain design
Cite as Elevating Devices Safety Regulation, B.C. Reg. 101/2004, s. 47 · last amended March 31, 2022 · read from BC Laws on November 17, 2026
The text
(1) If the safety of the passengers in a passenger carrying unit of an amusement ride is dependent on a single link chain, a safety retainer must be used together with the link chain.
(2) A link chain that is used on an amusement ride must be replaced with a new link chain if
(a) a reduction occurs in the original diameter of a link in the chain equal to or exceeding the amusement ride manufacturer's specifications,
(b) a link is twisted or distorted,
(c) corrosion occurs in a link to a degree that affects the factor of safety required for the link chain,
(d) the link chain is used for a purpose other than that for which it is intended to be used, or
(e) the link chain is used to carry a load in excess of its capacity.
(3) Link chain that is used as a safety retainer or in a stress bearing application on an amusement ride must
(a) be certified by the chain manufacturer as to its load carrying capacity,
(b) not be constructed of twisted wire or stamped links, and
(c) not have cold shuts, quick links, shackles or connecting links added to the link chain, except fasteners that are used as end fasteners on the link chain.
(4) Each fastener that is used with a link chain on an amusement ride must have a load carrying capacity that is at least equal to the link chain to which it is fastened.
Read the Elevating Devices Safety Regulation on BC Laws ↗
Made under Safety Standards Act, SBC 2003, c. 39.