Elevating Devices Safety Regulation, B.C. Reg. 101/2004

Section 43

Welding

Cite as Elevating Devices Safety Regulation, B.C. Reg. 101/2004, s. 43 · last amended March 31, 2022 · read from BC Laws on November 17, 2026

The text

(1) In this section: “equivalent procedures” means welding procedures that have equivalent safety standards to welding procedures set out in a code or standard adopted by this regulation; “professional engineer” means a professional engineer as defined in the Engineers and Geoscientists Act. (2) All welding procedures must comply with (a) the procedures set out in an applicable code or standard adopted by this regulation, or (b) if no code or standard adopted by this regulation is applicable, or no procedures are set out, equivalent procedures. (3) In a circumstance to which subsection (2) (b) applies, a person must (a) before welding, obtain the written opinion of a professional engineer as to what would be an equivalent procedure, and (b) after welding, obtain the written opinion of a professional engineer that the procedures used were equivalent procedures.
Read the Elevating Devices Safety Regulation on BC Laws ↗

Made under Safety Standards Act, SBC 2003, c. 39.