Elevating Devices Safety Regulation, B.C. Reg. 101/2004

Section 4.1

Applications under this Division

Cite as Elevating Devices Safety Regulation, B.C. Reg. 101/2004, s. 4.1 · last amended March 31, 2022 · read from BC Laws on November 17, 2026

The text

(1) An application for a certificate of qualification, or a renewal of a certificate of qualification, made under this Division must include proof, acceptable to a provincial safety manager, of all of the following, as applicable: (a) with respect to a certificate of qualification as a certified elevating device mechanic, the applicant's relevant training and work experience as set out in section 4.3; (b) with respect to a certificate of qualification as a mechanic-in-training, the matters referred to in section 4.6 (2) or (5), as applicable; (c) with respect to a certificate of qualification for an individual to whom section 4.7 applies, the matters referred to in that section. (2) For the purpose of applying section 2 of the Safety Standards General Regulation to an applicant described in subsection (1) (a) of this section, fees for examinations, if any, apply to each attempt of a required examination. (3) Despite section 3 (2) of the Safety Standards General Regulation, if an applicant for a certificate of qualification fails to pass all required examinations on the third attempt, the applicant may not apply for a certificate again for at least 5 years after that attempt. (4) A provincial safety manager may renew a certificate of qualification only if the certificate holder applies to renew the certificate before its expiry.
Read the Elevating Devices Safety Regulation on BC Laws ↗

Made under Safety Standards Act, SBC 2003, c. 39.