Elevating Devices Safety Regulation, B.C. Reg. 101/2004
Section 26.1
Changes and alterations to amusement rides
Cite as Elevating Devices Safety Regulation, B.C. Reg. 101/2004, s. 26.1 · last amended March 31, 2022 · read from BC Laws on November 17, 2026
The text
(1) An owner who proposes to make a change to the design or specifications of an amusement ride must ensure that the change meets the requirements of the Act, the regulations and the manufacturer's specifications.
(2) The following alterations must be considered to be a major alteration under the Act and a technical information package must be submitted to the provincial safety manager:
(a) increasing the manufacturer's maximum capacity or speed;
(b) changing the load bearing structure of an amusement ride in a manner that would reduce the original strength of the structure;
(c) changing the source of power for the main drive or control mechanism of an amusement ride, except with the manufacturer's approval;
(d) changing the method of guiding the passenger carrying units of an amusement ride;
(e) changing the classification of an amusement ride;
(f) relocating an amusement ride that was designed as a park ride;
(g) changing an amusement ride from ground mounted to trailer mounted.
Read the Elevating Devices Safety Regulation on BC Laws ↗
Made under Safety Standards Act, SBC 2003, c. 39.