Elevating Devices Safety Regulation, B.C. Reg. 101/2004
Section 12
Acceptance inspection and test
Cite as Elevating Devices Safety Regulation, B.C. Reg. 101/2004, s. 12 · last amended March 31, 2022 · read from BC Laws on November 17, 2026
The text
(1) In this section, “contractor or mechanic” means, respectively,
(a) a licensed elevating device contractor, or
(b) a certified elevating device mechanic employed by a licensed elevating device contractor.
(2) On completing regulated work under an installation permit for a new elevating device, or an elevating device for which an operating permit has previously been issued but has undergone a major alteration, a contractor or mechanic must
(a) submit to a provincial safety manager a signed declaration that the regulated work complies with the Act and regulations,
(b) request a safety officer to conduct an acceptance inspection, and
(c) ensure that, unless the provincial safety manager permits otherwise, the elevating device is not put into or returned to service until the inspection is complete.
(3) On completing regulated work under an installation permit for an elevating device that has undergone a minor alteration, a contractor or mechanic must do both of the following:
(a) within 30 days of completing the regulated work, submit to a provincial safety manager a signed declaration that the regulated work complies with the Act and regulations;
(b) within 60 days of returning the elevating device to service, request a safety officer to conduct an acceptance inspection.
(4) For the purposes of subsections (2) (a) and (3) (a), a declaration must be signed by a certified elevating device mechanic who is authorized, under the certified elevating device mechanic's certificate of qualification, to perform the regulated work that is the subject of the declaration.
(5) If an acceptance inspection will be conducted in response to a request under this section, the contractor or mechanic must
(a) make available to the safety officer a certified elevating device mechanic for the purpose of performing tests relevant to the acceptance inspection, and
(b) submit to that safety officer any information relevant to the acceptance inspection.
Read the Elevating Devices Safety Regulation on BC Laws ↗
Made under Safety Standards Act, SBC 2003, c. 39.