Electrical Safety Regulation, B.C. Reg. 100/2004

Section 9

Field safety representative certificates for applied technologists

Cite as Electrical Safety Regulation, B.C. Reg. 100/2004, s. 9 · last amended March 4, 2025 · read from BC Laws on November 17, 2026

The text

(1) An individual may apply to a provincial safety manager for a certificate of qualification as a field safety representative in one of the classes of certificates referred to in section 7 if the individual (a) holds qualifications in electrical engineering technology, (b) is registered as an applied science technologist under the Professional Governance Act, (c) completes a course in the application of electrical codes and standards required by a provincial safety manager, and (d) passes an examination required by the provincial safety manager. (2) An applied technologist who applies for a class A or class B certificate of qualification as a field safety representative must have (a) 2 years of work experience, acceptable to a provincial safety manager, after receiving a class C certificate of qualification as a field safety representative, or (b) 3 years of work experience, acceptable to a provincial safety manager, with electrical installations in which the voltage of installation is more than 150 volts to ground. (3) An applied technologist who applies for a class C certificate of qualification as a field safety representative must have one year of work experience acceptable to a provincial safety manager.
Read the Electrical Safety Regulation on BC Laws ↗

Made under Safety Standards Act, SBC 2003, c. 39.