Electrical Safety Regulation, B.C. Reg. 100/2004
Section 22
Definitions
Cite as Electrical Safety Regulation, B.C. Reg. 100/2004, s. 22 · last amended March 4, 2025 · read from BC Laws on November 17, 2026
The text
In this Division:
“acceptable industry standard” means any of the following:
(a) NFPA 499, "Recommended Practice for the Classification of Combustible Dusts and of Hazardous (Classified) Locations for Electrical Installations in Chemical Process Areas)";
(b) Part 10-2 of IEC (International Electrotechnical Commission) 60079-10-2 Explosive Atmospheres;
(c) a standard, acceptable to a safety manager, for classifying CDH locations;
“CDH location” means combustible dust hazardous location;
“CDH location management plan” means a plan prepared in accordance with section 24, and includes any revisions to the plan made under section 25;
“combustible dust” has the same meaning as in section 18 of the B.C. Electrical Code;
“hazardous location” has the same meaning as in section 0 of the B.C. Electrical Code, as it applies to combustible dust;
“NFPA” means National Fire Protection Association;
“qualified professional” means an individual described in section 23;
“wood processing facility” means a sawmill, planer mill or other facility that
(a) cuts, planes or otherwise mills raw lumber,
(b) is capable of producing Zone 20 or Zone 21 CDH locations, and
(c) first began cutting, planing or otherwise milling raw lumber before February 29, 2016;
“Zone 20” has the same meaning as in section 18 of the B.C. Electrical Code;
“Zone 21” has the same meaning as in section 18 of the B.C. Electrical Code.
Read the Electrical Safety Regulation on BC Laws ↗
Made under Safety Standards Act, SBC 2003, c. 39.