Electrical Safety Regulation, B.C. Reg. 100/2004

Section 10.1

Renewing certificates of qualification as field safety representative

Cite as Electrical Safety Regulation, B.C. Reg. 100/2004, s. 10.1 · last amended March 4, 2025 · read from BC Laws on November 17, 2026

The text

(1) A certificate of qualification issued by a provincial safety manager to a field safety representative is valid until the expiry date stated on the certificate. (2) A provincial safety manager may renew a certificate of qualification only if the certificate holder applies to renew the certificate before its expiry. (3) Subject to subsection (5), a Class A, B or C certificate of qualification may be renewed only if the certificate holder does one of the following: (a) completes at least 8 hours of continuing education; (b) passes an examination required by a provincial safety manager. (4) Subject to subsection (5), a certificate of qualification other than a Class A, B or C certificate of qualification may be renewed only if the certificate holder does one of the following: (a) completes at least 4 hours of continuing education; (b) if an examination is available for the class of certificate of qualification that is the subject of the application, passes an examination required by a provincial safety manager. (5) Despite section 3 of the Safety Standards General Regulation, if a certificate holder fails on the initial attempt to pass an examination referred to in this section, the holder's certificate of qualification may not be renewed unless the certificate holder completes the applicable number of hours of continuing education required under this section. (6) For the purposes of subsections (3) (a), (4) (a) and (5), a certificate holder must do all of the following: (a) complete continuing education that a provincial safety manager recognizes or evaluates as being relevant to the scope of the certificate; (b) complete the required number of hours of continuing education within the term of the certificate of qualification that is to be renewed; (c) provide proof, in a form and manner acceptable to a provincial safety manager, of the matters referred to in paragraphs (a) and (b) of this section.
Read the Electrical Safety Regulation on BC Laws ↗

Made under Safety Standards Act, SBC 2003, c. 39.