Safety Standards Act, SBC 2003, c. 39
Section 38
Compliance orders
Cite as Safety Standards Act, SBC 2003, c. 39, s. 38 · read from BC Laws on November 17, 2026
The text
(1) A safety officer may, in writing, issue to a person a compliance order under this section if
(a) in the opinion of the safety officer there is a risk of personal injury or damage to property because
(i) regulated work is being carried out in a manner that does not comply with this Act and the regulations, or a requirement, term or condition of an alternative safety approach, or
(ii) a regulated product is being used or disposed of in a manner that does not comply with this Act and the regulations, or a requirement, term or condition of an alternative safety approach,
(b) a person
(i) fails to comply with a requirement of a safety officer or safety manager who is carrying out duties assigned under this Act, or
(ii) obstructs, hinders, delays or fails to cooperate with or provide necessary assistance to a safety officer or safety manager who is carrying out duties assigned under this Act, or
(c) a person fails to comply with this Act and regulations.
(2) A compliance order under subsection (1) must
(a) name the person to whom the order is addressed,
(b) specify the action to be taken, stopped or modified,
(c) state the reasons for the order,
(d) state that the person may, in writing, request a review by a safety manager under section 49 or may appeal to the appeal board,
(e) be dated the day the order is made, and
(f) be served on the person to whom it is addressed.
(3) Without limiting subsection (2) (b), a compliance order may specify any of the following requirements:
(a) that regulated work be stopped, or that practices involving the regulated work be modified;
(b) that a regulated product be stopped, closed down or disconnected from energy sources, or that practices involving the regulated product be modified;
(c) that advertising, display or disposal of a regulated product be stopped;
(d) that any other action by a person be taken, modified or stopped if necessary to prevent, avoid or reduce risk of personal injury or damage to property.
(4) A safety officer may amend a compliance order and subsection (2) applies.
(5) If satisfied that the circumstances that gave rise to a compliance order are no longer present, a safety officer may terminate the compliance order by providing the person to whom the order is addressed with written permission to resume the work or activity detailed in the order.
(6) Regulated work or a regulated product that has been closed down, stopped, disconnected or turned off must not be started, reconnected or turned on again except
(a) as provided for in the order, or
(b) with written permission of a safety officer.
Read the Safety Standards Act on BC Laws ↗