Canadian Aviation Regulations, SOR/96-433
Section 706.09
Cite as Canadian Aviation Regulations, SOR/96-433, s. 706.09 · current to June 17, 2026 · regulation last amended June 17, 2026
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) No air operator shall permit a person or organization to perform maintenance on the air operator’s aircraft unless the person or organization has adequate facilities, equipment, spare parts and personnel available at the site where the maintenance is to be performed and
(a) the person or organization holds an approved maintenance organization (AMO) certificate issued pursuant to section 573.02 with a rating in a category applicable to the maintenance to be performed;
(b) where the maintenance is to be performed outside Canada by a person or organization that does not hold an AMO certificate issued pursuant to section 573.02, the person or organization has been approved under the laws of a state that is party to an agreement with Canada that provides for recognition of the work performed; or
(c) in cases other than those described in paragraphs (a) and (b), the performance of the maintenance by the person or organization has been approved by the Minister as being in conformity with these Regulations.
(2) An air operator shall ensure that a maintenance arrangement made with a person or organization pursuant to subsection (1)
(a) specifies the maintenance required and clearly defines the tasks to be performed; and
(b) is made in accordance with the procedures governing maintenance arrangements included in the MCM or is approved by the Minister as being in conformity with these Regulations.
(3) Where an air operator makes a maintenance arrangement to have maintenance performed outside Canada by a person or organization that does not hold an AMO certificate issued pursuant to section 573.02, the Minister shall, in the following cases, authorize the arrangement by issuing a maintenance specification to indicate that the maintenance control procedures set out in the arrangement conform to the Commercial Air Service Standards:
(a) the maintenance is performed by a person or organization that has been approved in accordance with paragraph (1)(b) and the issuance of a maintenance specification is either required by the agreement or requested by the foreign state; or
(b) the maintenance is performed in a state that is not party to an agreement with Canada that provides for recognition of the work performed.
(4) An air operator shall ensure the completion of all of the tasks defined in a maintenance arrangement in accordance with subsection (2).
Read the Canadian Aviation Regulations on the Justice Laws Website ↗
Made under Aeronautics Act, R.S.C. 1985, c. A-2.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.