Canadian Aviation Regulations, SOR/96-433

Section 573.11

Cite as Canadian Aviation Regulations, SOR/96-433, s. 573.11 · current to June 17, 2026 · regulation last amended June 17, 2026

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) Except as provided in subsection (2), no approved maintenance organization (AMO) certificate holder shall permit an external agent to perform maintenance on its behalf unless (a) the external agent holds an AMO certificate with a rating of a category specified pursuant to section 573.02 that is appropriate to the type of work to be performed or the aeronautical product to be maintained; (b) where the work is to be performed outside Canada, the external agent has been authorized to do the type of work to be performed or to perform maintenance on the type of aeronautical product to be maintained under the laws of a state that is party to an agreement with Canada and the agreement provides for the recognition of maintenance functions; or (c) in all other cases, the performance of the maintenance by the person or organization has been approved by the Minister as being in conformity with these Regulations. (2) Subject to subsection (4), an AMO certificate holder may permit work to be performed by an external agent other than an agent described in subsection (1) where the work is performed in accordance with an arrangement that provides for it, under the direct supervision of the person appointed pursuant to section 573.03 or 573.04 and certified by persons authorized to do so in accordance with the approved procedures set out in the AMO’s maintenance policy manual (MPM). (3) Arrangements respecting work to be performed by external agents pursuant to subsection (2) shall be made in accordance with procedures governing maintenance arrangements set out in the MPM or, if no such procedures are set out in the MPM, shall be approved by the Minister as ensuring conformity with the requirements of this Subpart. (4) An AMO certificate holder that requests an external agent to perform work shall (a) where the work is to be performed pursuant to subsection (1) or (2), be responsible for specifying the tasks to be performed by the agent and ensuring completion of the work; and (b) where the work is to be performed pursuant to subsection (2), be responsible for ensuring the conformity of that work with the requirements of Subpart 71. (5) A maintenance arrangement that is made by a foreign air operator to have its maintenance done in Canada by a person or organization that holds an AMO certificate issued pursuant to section 573.02 shall be authorized by a maintenance specification issued to the AMO in accordance with the requirements of Standard 573 — Approved Maintenance Organizations, where the air operator is from a state that (a) is party to an agreement with Canada that provides for recognition of the work performed and the issuance of a maintenance specification is specified in the agreement; or (b) is not party to an agreement with Canada that provides for recognition of the work performed and the issuance of a maintenance specification is requested by that state.
Read the Canadian Aviation Regulations on the Justice Laws Website ↗

Made under Aeronautics Act, R.S.C. 1985, c. A-2.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.