Canadian Aviation Regulations, SOR/96-433
Section 573.08
Cite as Canadian Aviation Regulations, SOR/96-433, s. 573.08 · current to June 17, 2026 · regulation last amended June 17, 2026
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) An approved maintenance organization (AMO) certificate holder shall provide the facilities and equipment specified in Standard 573 —Approved Maintenance Organizations that are necessary for the work to be performed.
(2) Except in cases provided for in a maintenance policy manual (MPM), work performed by an AMO certificate holder shall be performed in the facilities required by subsection (1), unless unforeseen circumstances do not permit the work to be performed in those facilities and the safety of the aircraft is not affected by the fact that the work is performed elsewhere.
(3) Where an AMO uses standards equivalent to those of the manufacturer of an aeronautical product for the performance of work pursuant to paragraph 571.02(1)(b), those standards shall be identified in accordance with section 573.10.
(4) Where a task undertaken by an AMO is divided into sub-tasks, the person appointed pursuant to section 573.03 shall establish a system of task control to ensure that all of the sub-tasks are completed prior to the signing of a maintenance release in respect of the completion of that task.
Read the Canadian Aviation Regulations on the Justice Laws Website ↗
Made under Aeronautics Act, R.S.C. 1985, c. A-2.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.