Canadian Aviation Regulations, SOR/96-433
Section 561.03
Cite as Canadian Aviation Regulations, SOR/96-433, s. 561.03 · current to June 17, 2026 · regulation last amended June 17, 2026
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) An applicant for the issuance or amendment of a manufacturer certificate respecting an aeronautical product shall submit an application to the Minister that includes the documents specified in section 561.03 of Standard 561.
(2) An applicant for the issuance or amendment of a manufacturer certificate respecting an aeronautical product shall
(a) be the holder of, or applicant for, a design approval for that aeronautical product; or
(b) have written authorization from the holder of a design approval to manufacture that aeronautical product.
(3) An applicant for the issuance or amendment of a manufacturer certificate respecting an aeronautical product shall demonstrate that they have access to all present and future design data, process specifications and other related information necessary for the continuing airworthiness of the aeronautical product.
(4) The Minister shall issue or amend a manufacturer certificate authorizing an applicant to manufacture the aeronautical products set out in the manufacturer certificate if the applicant meets the requirements of this Subpart.
(5) A manufacturer certificate may authorize the manufacture of a limited number of an aeronautical product where
(a) an applicant has made an application for a design approval for that aeronautical product but it has not yet been issued; or
(b) an applicant is about to enter into a license agreement with the holder of the design approval for that aeronautical product.
(6) Unless an expiry date is specified in the manufacturer certificate issued under subsection (4), the certificate shall remain in effect until it is surrendered by the manufacturer or suspended or cancelled.
(7) A manufacturer certificate is not transferable.
(8) Except as provided in section 561.06, the final assembly facilities for an aeronautical product specified in a manufacturer certificate shall be located in Canada.
Read the Canadian Aviation Regulations on the Justice Laws Website ↗
Made under Aeronautics Act, R.S.C. 1985, c. A-2.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.