Canadian Aviation Regulations, SOR/96-433
Section 521.367
Cite as Canadian Aviation Regulations, SOR/96-433, s. 521.367 · current to June 17, 2026 · regulation last amended June 17, 2026
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) The holder of a design approval document in respect of an aeronautical product shall develop and maintain the manuals and their supplements that are required by the certification basis of the aeronautical product and are required to support the operation of the product in service, including
(a) an installation manual;
(b) an operating manual;
(c) a maintenance manual;
(d) an overhaul manual;
(e) servicing instructions;
(f) instructions for continued airworthiness;
(g) an illustrated parts manual; and
(h) service bulletins or equivalent documents.
(2) The holder of a design approval document other than a Canadian Technical Standard Order (CAN-TSO) Design Approval in respect of an appliance or a part shall develop and maintain the manuals and their supplements that are required by the certification basis of the aeronautical product and are required to support the operation of the product in service, including
(a) an aircraft flight manual;
(b) a structural repair manual;
(c) supplemental integrity instructions;
(d) a master minimum equipment list; and
(e) a maintenance review board report.
(3) The holder of a design approval document in respect of an aeronautical product shall, on request, provide the Minister with up to six copies of the manuals and their supplements referred to in subsections (1) and (2), at no cost, in a format agreed to by the Minister.
Read the Canadian Aviation Regulations on the Justice Laws Website ↗
Made under Aeronautics Act, R.S.C. 1985, c. A-2.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.